Galvanized Steel Conical Monitoring Rod

Cross arm (borrow pole), hoop pick pole:
The cross arm (borrow pole) and hoop pick pole have a diameter of ≥60mm and extend from 0.5 to 4 meters. They are seamless steel pipes with a wall thickness of ≥3mm. The surface is hot-dip galvanized and electrostatically sprayed. Different types of poles and construction methods are selected according to actual conditions.

Community standing pole:

1. L-shaped standing pole with a height of 3 meters/3.5 meters/4 meters and variable diameter. The main pole has a length of 1 meter and a diameter of 140mm, while the remaining part has a length and diameter of 76mm. The length of the cross arm is 0.5 meters. The main pole has a thickness of ≥4mm, and the average diameter of the cross arm is ≥60mm with a wall thickness of ≥3mm.
2. The pole is made of Q235 material, and automatic close-gap submerged arc welding should be used for welding, with even and continuous welds, beautiful appearance, strong penetration, and one-time forming.
3. The pole should be free from rust, and after processing, it should undergo overall hot-dip galvanizing treatment. The surface of the galvanized layer should be smooth and beautiful, without wrinkles, drips, zinc tumors, peeling, spots, or defects on the positive and negative sides. The hot-dip galvanizing should comply with national standards, and the thickness of the galvanized layer should be ≥85μm to ensure 20 years of corrosion resistance.
4. High-quality outdoor plastic powder should be selected for electrostatic spraying treatment of the galvanized pole, with a spraying thickness of ≥0.5mm and uniform color.
5. The bottom of the pole should have a maintenance door with specifications of 200*90mm, using internal hexagon door screws.

Equal diameter pole 3-4 meters:

1. L-shaped standing pole with a height of 3 meters or 4 meters and a cross arm length of 1-3 meters. The main pole is an equal diameter pole with a diameter of ≥120mm and a thickness of ≥4mm. The average diameter of the cross arm is ≥60mm with a wall thickness of ≥3mm. There is a 50cm reflective strip wrapped around the pole.
2. The pole is made of Q235 material, and automatic close-gap submerged arc welding should be used for welding, with even and continuous welds, beautiful appearance, strong penetration, and one-time forming.
3. The pole should be free from rust, and after processing, it should undergo overall hot-dip galvanizing treatment. The surface of the galvanized layer should be smooth and beautiful, without wrinkles, drips, zinc tumors, peeling, spots, or defects on the positive and negative sides. The hot-dip galvanizing should comply with national standards, and the thickness of the galvanized layer should be ≥85μm to ensure 20 years of corrosion resistance.
4. High-quality outdoor plastic powder should be selected for electrostatic spraying treatment of the galvanized pole, with a spraying thickness of ≥0.5mm and uniform color.

Octagonal pole 3-4 meters:

1. Straight pole with a height of 3-4 meters and a cross arm length of 0.5-3 meters. It is made of octagonal pole with a bottom outer diameter of ≥150mm and a top diameter of ≥100mm. The suspension pole has a diameter of ≥76mm. There is a 50cm reflective strip wrapped around the pole.
2. The main pole has a thickness of ≥4mm, and the suspension pole has a wall thickness of ≥3mm. It is hot-dip galvanized and coated with paint.
3. The pole is made of Q235 material, and automatic close-gap submerged arc welding should be used for welding, with even and continuous welds, beautiful appearance, strong penetration, and one-time forming.
4. The pole should be free from rust, and after processing, it should undergo overall hot-dip galvanizing treatment. The surface of the galvanized layer should be smooth and beautiful, without wrinkles, drips, zinc tumors, peeling, spots, or defects on the positive and negative sides. The hot-dip galvanizing should comply with national standards, and the thickness of the galvanized layer should be ≥85μm to ensure 20 years of corrosion resistance.
5. High-quality outdoor plastic powder should be selected for electrostatic spraying treatment of the galvanized pole, with a spraying thickness of ≥0.5mm and uniform color.

Octagonal pole 5 meters:

1. Straight pole with a height of 5 meters and a cross arm length of 0.5-3 meters. It is made of octagonal pole with a bottom outer diameter of ≥180mm and a top diameter of ≥130mm. The suspension pole has a diameter of ≥76mm. There is a 50cm reflective strip wrapped around the pole.
2. The main pole has a thickness of ≥4mm, and the suspension pole has a wall thickness of ≥3mm. It is hot-dip galvanized and coated with paint.
3. The pole is made of Q235 material, and automatic close-gap submerged arc welding should be used for welding, with even and continuous welds, beautiful appearance, strong penetration, and one-time forming.
4. The pole should be free from rust, and after processing, it should undergo overall hot-dip galvanizing treatment. The surface of the galvanized layer should be smooth and beautiful, without wrinkles, drips, zinc tumors, peeling, spots, or defects on the positive and negative sides. The hot-dip galvanizing should comply with national standards, and the thickness of the galvanized layer should be ≥85μm to ensure 20 years of corrosion resistance.
5. High-quality outdoor plastic powder should be selected for electrostatic spraying treatment of the galvanized pole, with a spraying thickness of ≥0.5mm and uniform color.

Equal diameter pole 5-6 meters:

1. L-shaped standing pole with a height of 6 meters and a cross arm length of 1-5 meters. The main pole is an equal diameter pole with a diameter of ≥220mm and a thickness of ≥6mm. The average diameter of the cross arm is ≥114mm with a wall thickness of ≥6mm. There is a 50cm reflective strip wrapped around the pole.
2. The pole is made of Q235 material, and automatic close-gap submerged arc welding should be used for welding, with even and continuous welds, beautiful appearance, strong penetration, and one-time forming.
3. The pole should be free from rust, and after processing, it should undergo overall hot-dip galvanizing treatment. The surface of the galvanized layer should be smooth and beautiful, without wrinkles, drips, zinc tumors, peeling, spots, or defects on the positive and negative sides. The hot-dip galvanizing should comply with national standards, and the thickness of the galvanized layer should be ≥85μm to ensure 20 years of corrosion resistance.
4. High-quality outdoor plastic powder should be selected for electrostatic spraying treatment of the galvanized pole, with a spraying thickness of ≥0.5mm and uniform color.

L6 pick 1-5 meters:

1. The straight pole is 6 meters high and can reach a length of 1-5 meters. It uses an octagonal pole with a bottom outer diameter of ≥260mm and a top outer diameter of ≥220mm. The suspension pole has a bottom outer diameter of ≥150mm and a top outer diameter of ≥100mm. There is a 50cm reflective strip wrapped around the pole body.
2. The main pole wall thickness should be ≥6mm. The suspension pole wall thickness should be ≥4mm. They should be hot-dip galvanized and coated with colored paint.
3. The pole components should be made of Q235 material and welded using automatic seam submerged arc welding. The welds should be even, continuous, aesthetically pleasing, strong in penetration, and formed in one go.
4. The pole components should be free from rust and should undergo overall hot-dip galvanization after processing. The galvanized surface should be smooth and aesthetically pleasing, without wrinkles, drips, zinc tumors, peeling, spots, or defects on the positive and negative sides. The hot-dip galvanization should comply with national standards, and the galvanized layer thickness should be ≥85μm to ensure 20 years of corrosion resistance.
5. High-quality outdoor plastic powder should be used for electrostatic spraying treatment of the already galvanized pole body. The thickness of the spray should be ≥0.5mm, and the color should be uniform.

L6-6:

1. The straight pole is 6 meters high and can reach a length of 6 meters. It uses an octagonal pole with a bottom outer diameter of ≥285mm and a top outer diameter of ≥220mm. The suspension pole has a bottom outer diameter of ≥170mm and a top outer diameter of ≥100mm. There is a 50cm reflective strip wrapped around the pole body.
2. The main pole wall thickness should be ≥6mm. The suspension pole wall thickness should be ≥6mm. They should be hot-dip galvanized and coated with colored paint.
3. The pole components should be made of Q235 material and welded using automatic seam submerged arc welding. The welds should be even, continuous, aesthetically pleasing, strong in penetration, and formed in one go.
4. The pole components should be free from rust and should undergo overall hot-dip galvanization after processing. The galvanized surface should be smooth and aesthetically pleasing, without wrinkles, drips, zinc tumors, peeling, spots, or defects on the positive and negative sides. The hot-dip galvanization should comply with national standards, and the galvanized layer thickness should be ≥85μm to ensure 20 years of corrosion resistance.
5.  High-quality outdoor plastic powder should be used for electrostatic spraying treatment of the already galvanized pole body. The thickness of the spray should be ≥0.5mm, and the color should be uniform.

L6 picking 7-8 meters:

1. The straight pole is 6 meters high and can reach a length of 7-8 meters. It uses an octagonal pole with a bottom outer diameter of ≥285mm and a top outer diameter of ≥220mm. The suspension pole has a bottom outer diameter of ≥220mm and a top outer diameter of ≥100mm. There is a 50cm reflective strip wrapped around the pole body.
2. The main pole wall thickness should be ≥8mm. The suspension pole wall thickness should be ≥6mm. They should be hot-dip galvanized and coated with colored paint.
3. The pole components should be made of Q235 material and welded using automatic seam submerged arc welding. The welds should be even, continuous, aesthetically pleasing, strong in penetration, and formed in one go.
4. The pole components should be free from rust and should undergo overall hot-dip galvanization after processing. The galvanized surface should be smooth and aesthetically pleasing, without wrinkles, drips, zinc tumors, peeling, spots, or defects on the positive and negative sides. The hot-dip galvanization should comply with national standards, and the galvanized layer thickness should be ≥85μm to ensure 20 years of corrosion resistance.
5. High-quality outdoor plastic powder should be used for electrostatic spraying treatment of the already galvanized pole body. The thickness of the spray should be ≥0.5mm, and the color should be uniform.

L6 picking 9-10 meters:

1. The straight pole is 6 meters high and can reach a length of 9-10 meters. It uses an octagonal pole with a bottom outer diameter of ≥285mm and a top outer diameter of ≥220mm. The suspension pole has a bottom outer diameter of ≥250mm and a top outer diameter of ≥100mm. There is a 50cm reflective strip wrapped around the pole body.
2. The main pole wall thickness should be ≥8mm. The suspension pole wall thickness should be ≥6mm. They should be hot-dip galvanized and coated with colored paint.
3. The pole components should be made of Q235 material and welded using automatic seam submerged arc welding. The welds should be even, continuous, aesthetically pleasing, strong in penetration, and formed in one go.
4. The pole components should be free from rust and should undergo overall hot-dip galvanization after processing. The galvanized surface should be smooth and aesthetically pleasing, without wrinkles, drips, zinc tumors, peeling, spots, or defects on the positive and negative sides. The hot-dip galvanization should comply with national standards, and the galvanized layer thickness should be ≥85μm to ensure 20 years of corrosion resistance.
5. High-quality outdoor plastic powder should be used for electrostatic spraying treatment of the already galvanized pole body. The thickness of the spray should be ≥0.5mm, and the color should be uniform.

L6.5 picking 7-8 meters:

1. The straight pole is 6.5 meters high and can reach a length of 7-8 meters. It uses an octagonal pole with a outer diameter of ≥320mm at the bottom and ≥260mm at the top. The suspension pole has a bottom outer diameter of ≥220mm and a top outer diameter of ≥100mm. There is a 50cm reflective strip wrapped around the pole body.
2. The main pole wall thickness should be ≥8mm. The suspension pole wall thickness should be ≥6mm. They should be hot-dip galvanized and coated with colored paint.
3. The pole components should be made of Q235 material and welded using automatic seam submerged arc welding. The welds should be even, continuous, aesthetically pleasing, strong in penetration, and formed in one go.
4. The pole components should be free from rust and should undergo overall hot-dip galvanization after processing. The galvanized surface should be smooth and aesthetically pleasing, without wrinkles, drips, zinc tumors, peeling, spots, or defects on the positive and negative sides. The hot-dip galvanization should comply with national standards, and the galvanized layer thickness should be ≥85μm to ensure 20 years of corrosion resistance.
5. High-quality outdoor plastic powder should be used for electrostatic spraying treatment of the already galvanized pole body. The thickness of the spray should be ≥0.5mm, and the color should be uniform.

L6.5 picking 9-10 meters:

1. The straight pole is 6.5 meters high and can reach a length of 9-10 meters. It uses an octagonal pole with a bottom outer diameter of ≥285mm and a top outer diameter of ≥220mm. The suspension pole has a bottom outer diameter of ≥250mm and a top outer diameter of ≥100mm. There is a 50cm reflective strip wrapped around the pole body.
2. The main pole wall thickness should be ≥8mm. The suspension pole wall thickness should be ≥6mm. They should be hot-dip galvanized and coated with colored paint.
3. The pole components should be made of Q235 material and welded using automatic seam submerged arc welding. The welds should be even, continuous, aesthetically pleasing, strong in penetration, and formed in one go.
4. The pole components should be free from rust and should undergo overall hot-dip galvanization after processing. The galvanized surface should be smooth and aesthetically pleasing, without wrinkles, drips, zinc tumors, peeling, spots, or defects on the positive and negative sides. The hot-dip galvanization should comply with national standards, and the galvanized layer thickness should be ≥85μm to ensure 20 years of corrosion resistance.
5. High-quality outdoor plastic powder should be used for electrostatic spraying treatment of the already galvanized pole body. The thickness of the spray should be ≥0.5mm, and the color should be uniform.

L6.5 Picking 9-10 Meters:

1. The pole is 6.5 meters high and picks up to 10 meters. It is made of octagonal pole with an outer diameter of ≥320mm at the top and ≥260mm at the bottom. The cantilever arm has an outer diameter of ≥250mm at the top and ≥100mm at the bottom. A 50cm reflective strip is wrapped around the pole.
2. The main pole wall thickness should be ≥8mm, and the cantilever arm wall thickness should be ≥6mm. Both should be hot-dip galvanized and plastisol coated with colored paint.
3. The pole should be made of Q235 material, and the welding should be done using automatic submerged arc welding with even and continuous welds, ensuring strong penetration and a smooth and aesthetic appearance.
4. The pole should be free from rust and undergo overall hot-dip galvanization treatment. The galvanized layer should be smooth and free from wrinkles, drips, zinc tumors, peeling, spots, or surface defects. The galvanized layer thickness should be ≥85μm, ensuring corrosion resistance for 20 years according to national standards.
5. High-quality outdoor powder coating should be used to statically spray coat the already galvanized pole with a coating thickness of ≥0.5mm, ensuring a uniform color.

L6.5 Picking 11-12 Meters:

1. The pole is 6 meters high and picks up to 11-12 meters. It is made of octagonal pole with a bottom outer diameter of ≥340mm and a top diameter of ≥280mm. The cantilever arm has an outer diameter of ≥230mm at the top and ≥110mm at the bottom. A 50cm reflective strip is wrapped around the pole.
2. The main pole wall thickness should be ≥10mm, and the cantilever arm wall thickness should be ≥6mm. Both should be hot-dip galvanized and plastisol coated with colored paint.
3. The pole should be made of Q235 material, and the welding should be done using automatic submerged arc welding with even and continuous welds, ensuring strong penetration and a smooth and aesthetic appearance.
4. The pole should be free from rust and undergo overall hot-dip galvanization treatment. The galvanized layer should be smooth and free from wrinkles, drips, zinc tumors, peeling, spots, or surface defects. The galvanized layer thickness should be ≥85μm, ensuring corrosion resistance for 20 years according to national standards.
5. High-quality outdoor powder coating should be used to statically spray coat the already galvanized pole with a coating thickness of ≥0.5mm, ensuring a uniform color.

Equal Diameter Pole 4.5-0.6 Meters:

1. The L-shaped pole has a height of 4.5 meters and a cantilever arm length of 0.6 meters. The main pole should have a diameter of ≥160mm and a thickness of ≥6mm. The average pipe diameter of the cantilever arm should be ≥89mm, with a wall thickness of ≥3mm.
2. The pole should be made of Q235 material, and the welding should be done using automatic submerged arc welding with even and continuous welds, ensuring strong penetration and a smooth and aesthetic appearance.
3. The pole should be free from rust and undergo overall hot-dip galvanization treatment. The galvanized layer should be smooth and free from wrinkles, drips, zinc tumors, peeling, spots, or surface defects. The galvanized layer thickness should be ≥85μm, ensuring corrosion resistance for 20 years according to national standards.
4. High-quality outdoor powder coating should be used to statically spray coat the already galvanized pole with a coating thickness of ≥0.5mm, ensuring a uniform color.

Why choose us?

• With our expertise and experience, you can trust us to deliver on our promises.
• For a long time, our Galvanized Steel Conical Monitoring Rod has enjoyed a good reputation in the domestic and international markets for their reasonable price and superior performance, and has been recognized by our customers!
• Our Control Rod products are of the highest quality.
• Our company creates development space for employees, stimulates their potential and improves work efficiency. We attach importance to talents and develop them.
• We take great pride in delivering exceptional quality products and services to our customers.
• We carry out perfect testing methods, quick and thoughtful pre-sales and after-sales services.
• We offer a range of Control Rod products to suit every need and budget.
• We strive to strengthen safe and compliant operations and create social and economic value.
• We provide a wide range of Control Rod products for all your needs.
• We take technology development as the first, project management as the foundation, and continue to innovate and develop.

Hot Tags: galvanized steel conical monitoring rod, China galvanized steel conical monitoring rod manufacturers, suppliers, factory, lighting pole color temperature, led reading light, white led light, lighting pole compliance, led module light, lighting pole load bearing