Single Arm Telescopic Polygonal Monitoring Rod

Cross-arm (borrowed arm), pole with hoop, diameter ≥ 60MM, projecting 0.5-4 meters, seamless steel tube, wall thickness ≥ 3MM, surface treated with hot-dip galvanizing and electrostatic spraying. Different types of poles and construction methods should be selected according to actual conditions.

Community standing pole:

1. L-shaped standing pole with height of 3 meters/3.5 meters/4 meters, main pole length of 1 meter, diameter 140mm, remaining part length diameter 76mm, pick-arm length of 0.5 meters, main pole thickness ≥ 4mm; average pipe diameter of pick-arm ≥ 60mm, pipe wall thickness ≥ 3mm.
2. The pole material is Q235, and welding should be done using automatic butt fusion submerged arc welding, with even and continuous welding seams, beautiful appearance, strong penetration, and one-time forming.
3. The pole should be free from rust and undergo overall hot-dip galvanization after processing. The galvanized layer should have a smooth and beautiful surface without wrinkles, sagging, zinc tumors, peeling, spots, or defects in the front and back surfaces. The hot-dip galvanizing should comply with national standards, and the galvanized layer thickness should be ≥ 85μm to ensure 20 years of rust-free performance.
4. High-quality outdoor powder coating should be used for electrostatic spray treatment on the galvanized pole body, with a spray coating thickness ≥ 0.5mm and uniform color.
5. The lower end of the pole should have an inspection door with a size of 200*90mm, using internal hexagonal door screws.

Equal-diameter pole 3-4 meters:

1. L-shaped standing pole with a height of 3 meters or 4 meters, pick-arm length of 1-3 meters, and equal-diameter pole with a diameter ≥ 120mm for the main pole, main pole thickness ≥ 4mm; pick-arm average pipe diameter ≥ 60mm, pipe wall thickness ≥ 3mm, with a 50cm reflective strip around the pole.
2. The pole material is Q235, and welding should be done using automatic butt fusion submerged arc welding, with even and continuous welding seams, beautiful appearance, strong penetration, and one-time forming.
3. The pole should be free from rust and undergo overall hot-dip galvanization after processing. The galvanized layer should have a smooth and beautiful surface without wrinkles, sagging, zinc tumors, peeling, spots, or defects in the front and back surfaces. The hot-dip galvanizing should comply with national standards, and the galvanized layer thickness should be ≥ 85μm to ensure 20 years of rust-free performance.
4. High-quality outdoor powder coating should be used for electrostatic spray treatment on the galvanized pole body, with a spray coating thickness ≥ 0.5mm and uniform color.

Octagonal pole 3-4 meters:

1. Straight pole with a height of 3-4 meters, projecting 0.5-3 meters, using an octagonal pole, bottom outer diameter ≥ 150mm, top ≥ 100mm, projecting pole diameter ≥ 76mm, with a 50cm reflective strip around the pole.
2. Main pole wall thickness ≥ 4mm; projecting pole wall thickness ≥ 3mm, hot-dip galvanized and plastic-coated with colored paint.
3. The pole material is Q235, and welding should be done using automatic butt fusion submerged arc welding, with even and continuous welding seams, beautiful appearance, strong penetration, and one-time forming.
4. The pole should be free from rust and undergo overall hot-dip galvanization after processing. The galvanized layer should have a smooth and beautiful surface without wrinkles, sagging, zinc tumors, peeling, spots, or defects in the front and back surfaces. The hot-dip galvanizing should comply with national standards, and the galvanized layer thickness should be ≥ 85μm to ensure 20 years of rust-free performance.
5. High-quality outdoor powder coating should be used for electrostatic spray treatment on the galvanized pole body, with a spray coating thickness ≥ 0.5mm and uniform color.

Octagonal pole 5 meters:

1. Straight pole with a height of 5 meters, projecting 0.5-3 meters, using an octagonal pole, bottom outer diameter ≥ 180mm, top ≥ 130mm, projecting pole diameter ≥ 76mm, with a 50cm reflective strip around the pole.
2. Main pole wall thickness ≥ 4mm; projecting pole wall thickness ≥ 3mm, hot-dip galvanized and plastic-coated with colored paint.
3. The pole material is Q235, and welding should be done using automatic butt fusion submerged arc welding, with even and continuous welding seams, beautiful appearance, strong penetration, and one-time forming.
4. The pole should be free from rust and undergo overall hot-dip galvanization after processing. The galvanized layer should have a smooth and beautiful surface without wrinkles, sagging, zinc tumors, peeling, spots, or defects in the front and back surfaces. The hot-dip galvanizing should comply with national standards, and the galvanized layer thickness should be ≥ 85μm to ensure 20 years of rust-free performance.
5. High-quality outdoor powder coating should be used for electrostatic spray treatment on the galvanized pole body, with a spray coating thickness ≥ 0.5mm and uniform color.

Equal-diameter pole 5-6 meters:

1. L-shaped standing pole with a height of 6 meters, pick-arm length of 1-5 meters, equal-diameter pole with a diameter ≥ 220mm for the main pole, wall thickness ≥ 6mm; pick-arm average pipe diameter ≥ 114mm; pipe wall thickness ≥ 6mm, with a 50cm reflective strip around the pole.
2. The pole material is Q235, and welding should be done using automatic butt fusion submerged arc welding, with even and continuous welding seams, beautiful appearance, strong penetration, and one-time forming.
3. The pole should be free from rust and undergo overall hot-dip galvanization after processing. The galvanized layer should have a smooth and beautiful surface without wrinkles, sagging, zinc tumors, peeling, spots, or defects in the front and back surfaces. The hot-dip galvanizing should comply with national standards, and the galvanized layer thickness should be ≥ 85μm to ensure 20 years of rust-free performance.
4. High-quality outdoor powder coating should be used for electrostatic spray treatment on the galvanized pole body, with a spray coating thickness ≥ 0.5mm and uniform color.

L6: Picking 1-5 meters:

1. The main pole is 6 meters high and can pick 1-5 meters. It uses an octagonal pole with a minimum outer diameter of 260mm at the bottom and a minimum outer diameter of 220mm at the top. The crossbar has a minimum outer diameter of 150mm at the bottom and a minimum outer diameter of 100mm at the top. There should be a 50cm reflective strip wrapped around the pole body.
2. The main pole should have a minimum wall thickness of 6mm, and the crossbar should have a minimum wall thickness of 4mm. They should be hot-dip galvanized and coated with colored paint.
3. The pole components should be made of Q235 material, and welding should be done using automatic seam submerged arc welding. The welds should be uniform, continuous, aesthetically pleasing, strong penetration, and formed in one go.
4. The pole components should be free from rust, and after processing, they should undergo overall hot-dip galvanizing treatment. The surface of the galvanized layer should be smooth and beautiful, without wrinkles, sagging, zinc tumors, peeling, spots, or defects on the positive and negative sides. The thickness of the galvanized layer should be ≥85μm, in accordance with national standards, to ensure 20 years of corrosion resistance.
5. High-quality outdoor plastic powder should be selected for electrostatic spraying treatment on the galvanized pole body. The thickness of the spray coating should be ≥0.5mm, and the color should be uniform.

L6-6: Picking 6 meters:

1. The main pole is 6 meters high and can pick 6 meters. It uses an octagonal pole with a minimum outer diameter of 285mm at the bottom and a minimum outer diameter of 220mm at the top. The crossbar has a minimum outer diameter of 170mm at the bottom and a minimum outer diameter of 100mm at the top. There should be a 50cm reflective strip wrapped around the pole body.
2. The main pole should have a minimum wall thickness of 6mm, and the crossbar should have a minimum wall thickness of 6mm. They should be hot-dip galvanized and coated with colored paint.
3. The pole components should be made of Q235 material, and welding should be done using automatic seam submerged arc welding. The welds should be uniform, continuous, aesthetically pleasing, strong penetration, and formed in one go.
4. The pole components should be free from rust, and after processing, they should undergo overall hot-dip galvanizing treatment. The surface of the galvanized layer should be smooth and beautiful, without wrinkles, sagging, zinc tumors, peeling, spots, or defects on the positive and negative sides. The thickness of the galvanized layer should be ≥85μm, in accordance with national standards, to ensure 20 years of corrosion resistance.
5. High-quality outdoor plastic powder should be selected for electrostatic spraying treatment on the galvanized pole body. The thickness of the spray coating should be ≥0.5mm, and the color should be uniform.

L6: Picking 7-8 meters:

1. The main pole is 6 meters high and can pick 7-8 meters. It uses an octagonal pole with a minimum outer diameter of 285mm at the bottom and a minimum outer diameter of 220mm at the top. The crossbar has a minimum outer diameter of 220mm at the bottom and a minimum outer diameter of 100mm at the top. There should be a 50cm reflective strip wrapped around the pole body.
2. The main pole should have a minimum wall thickness of 8mm, and the crossbar should have a minimum wall thickness of 6mm. They should be hot-dip galvanized and coated with colored paint.
3. The pole components should be made of Q235 material, and welding should be done using automatic seam submerged arc welding. The welds should be uniform, continuous, aesthetically pleasing, strong penetration, and formed in one go.
4. The pole components should be free from rust, and after processing, they should undergo overall hot-dip galvanizing treatment. The surface of the galvanized layer should be smooth and beautiful, without wrinkles, sagging, zinc tumors, peeling, spots, or defects on the positive and negative sides. The thickness of the galvanized layer should be ≥85μm, in accordance with national standards, to ensure 20 years of corrosion resistance.
5. High-quality outdoor plastic powder should be selected for electrostatic spraying treatment on the galvanized pole body. The thickness of the spray coating should be ≥0.5mm, and the color should be uniform.

L6: Picking 9-10 meters:

1. The main pole is 6 meters high and can pick 9-10 meters. It uses an octagonal pole with a minimum outer diameter of 285mm at the bottom and a minimum outer diameter of 220mm at the top. The crossbar has a minimum outer diameter of 250mm at the bottom and a minimum outer diameter of 100mm at the top. There should be a 50cm reflective strip wrapped around the pole body.
2. The main pole should have a minimum wall thickness of 8mm, and the crossbar should have a minimum wall thickness of 6mm. They should be hot-dip galvanized and coated with colored paint.
3. The pole components should be made of Q235 material, and welding should be done using automatic seam submerged arc welding. The welds should be uniform, continuous, aesthetically pleasing, strong penetration, and formed in one go.
4. The pole components should be free from rust, and after processing, they should undergo overall hot-dip galvanizing treatment. The surface of the galvanized layer should be smooth and beautiful, without wrinkles, sagging, zinc tumors, peeling, spots, or defects on the positive and negative sides. The thickness of the galvanized layer should be ≥85μm, in accordance with national standards, to ensure 20 years of corrosion resistance.
5. High-quality outdoor plastic powder should be selected for electrostatic spraying treatment on the galvanized pole body. The thickness of the spray coating should be ≥0.5mm, and the color should be uniform.

L6.5: Picking 7-8 meters:

1. The main pole is 6.5 meters high and can pick 7-8 meters. It uses an octagonal pole with a minimum outer diameter of 320mm at the bottom and a minimum outer diameter of 260mm at the top. The crossbar has a minimum outer diameter of 220mm at the bottom and a minimum outer diameter of 100mm at the top. There should be a 50cm reflective strip wrapped around the pole body.
2. The main pole should have a minimum wall thickness of 8mm, and the crossbar should have a minimum wall thickness of 6mm. They should be hot-dip galvanized and coated with colored paint.
3. The pole components should be made of Q235 material, and welding should be done using automatic seam submerged arc welding. The welds should be uniform, continuous, aesthetically pleasing, strong penetration, and formed in one go.
4. The pole components should be free from rust, and after processing, they should undergo overall hot-dip galvanizing treatment. The surface of the galvanized layer should be smooth and beautiful, without wrinkles, sagging, zinc tumors, peeling, spots, or defects on the positive and negative sides. The thickness of the galvanized layer should be ≥85μm, in accordance with national standards, to ensure 20 years of corrosion resistance.
5. High-quality outdoor plastic powder should be selected for electrostatic spraying treatment on the galvanized pole body. The thickness of the spray coating should be ≥0.5mm, and the color should be uniform.

L6.5 picking 9-10 meters:

1. The straight pole is 6.5 meters high and picks 10 meters. It is made of octagonal pole. The outer diameter of the straight pole is ≥320mm, and the top end is ≥260mm. The outer diameter of the boom is ≥250mm, and the top end is ≥100mm. There is a 50cm reflective strip wrapped around the pole body.
2. The main pole wall thickness is ≥8mm. The boom wall thickness is ≥6mm. They are hot-dip galvanized and coated with colored paint.
3. The pole components are made of Q235 material. Automatic butt welding with submerged arc welding should be used for welding, ensuring even and aesthetically pleasing welds with strong penetration and one-time forming.
4. The pole components should be free from rust and undergo overall hot-dip galvanizing treatment after processing. The surface of the galvanized layer should be smooth and beautiful, without wrinkles, drips, zinc tumors, peeling, spots, or defects on the anode and cathode sides. The thickness of the galvanized layer should be ≥85μm according to national standards, ensuring 20 years of corrosion resistance.
5. High-quality outdoor powder coating should be selected to electrostatically spray the pre-galvanized pole body, with a spray thickness ≥0.5mm and uniform color.

L6.5 picking 11-12 meters:

1. The straight pole is 6 meters high and picks 11 to 12 meters. It is made of octagonal pole. The bottom outer diameter of the straight pole is ≥340mm, and the top end is ≥280mm. The outer diameter of the boom is ≥230mm, and the top end is ≥110mm. There is a 50cm reflective strip wrapped around the pole body.
2. The main pole wall thickness is ≥10mm. The boom wall thickness is ≥6mm. They are hot-dip galvanized and coated with colored paint.
3. The pole components are made of Q235 material. Automatic butt welding with submerged arc welding should be used for welding, ensuring even and aesthetically pleasing welds with strong penetration and one-time forming.
4. The pole components should be free from rust and undergo overall hot-dip galvanizing treatment after processing. The surface of the galvanized layer should be smooth and beautiful, without wrinkles, drips, zinc tumors, peeling, spots, or defects on the anode and cathode sides. The thickness of the galvanized layer should be ≥85μm according to national standards, ensuring 20 years of corrosion resistance.
5. High-quality outdoor powder coating should be selected to electrostatically spray the pre-galvanized pole body, with a spray thickness ≥0.5mm and uniform color.

Equal diameter pole 4.5-0.6 meters:

1. The L-shaped vertical pole is 4.5 meters high with a boom length of 0.6 meters. The vertical pole is made of equal diameter pole with a diameter ≥160mm, and the main pole thickness is ≥6mm. The average pipe diameter of the boom pole is ≥89mm, and the pipe wall thickness is ≥3mm.
2. The pole components are made of Q235 material. Automatic butt welding with submerged arc welding should be used for welding, ensuring even and aesthetically pleasing welds with strong penetration and one-time forming.
3. The pole components should be free from rust and undergo overall hot-dip galvanizing treatment after processing. The surface of the galvanized layer should be smooth and beautiful, without wrinkles, drips, zinc tumors, peeling, spots, or defects on the anode and cathode sides. The thickness of the galvanized layer should be ≥85μm according to national standards, ensuring 20 years of corrosion resistance.
4. High-quality outdoor powder coating should be selected to electrostatically spray the pre-galvanized pole body, with a spray thickness ≥0.5mm and uniform color.

Why choose us?

• We believe in providing reliable and honest service to all our customers.
• In the future, we will always keep our mission in mind and take the innovation and development of Single Arm Telescopic Polygonal Monitoring Rod manufacturing and application industry as our vision.
• We take pride in our workmanship and are committed to providing you with the best possible products and services.
• We attach great importance to the comprehensive advantages of the company and strengthen internal cooperation and mutual support.
• At our company, we pride ourselves on being your trusted partner for all your Control Rod needs.
• We have successively launched a series of high-tech products, showing the innovative vitality of high-tech enterprises.
• We strive to exceed our customers' expectations with our excellent service.
• Our firm quickly grew in size and reputation because of its absolute dedication to superior quality manufacturing, substantial price of solutions and fantastic customer services.
• Our Control Rod products are designed to meet the needs of a wide range of industries.
• We accelerate the application of new materials, new technologies and new techniques, improve the conversion rate of science and technology, enhance the market competitiveness of enterprises and revitalize national industries.

Hot Tags: single arm telescopic polygonal monitoring rod, China single arm telescopic polygonal monitoring rod manufacturers, suppliers, factory, wholesale control rod, oem control rod, in demand control rod, design optimization for control rod, refund policy for control rod, resource conservation for control rod