Outdoor Liftable Polygonal Monitoring Rod

Arm bar (borrowed bar), hoop pick rod:
The arm bar (borrowed bar) and hoop pick rod have a diameter of ≥60mm and extend 0.5-4 meters. They are made of seamless steel pipe with a thickness of ≥3mm. The surface is treated with hot-dip galvanizing and electrostatic spraying. Different types of bars and construction methods should be selected according to the actual situation.

Residential area poles:

1. L-shaped poles with a height of 3 meters/3.5 meters/4 meters and varying diameters. The main pole has a length of 1 meter and a diameter of 140mm, while the remaining part has a length and diameter of 76mm. The length of the arm is 0.5 meters and the thickness of the main pole is ≥4mm. The average diameter of the pick rod is ≥60mm and the pipe wall thickness is ≥3mm.
2. The pole material is Q235, and the welding should be done using automatic butt welding with submerged arc. The weld should be even, continuous, beautiful, and have strong penetration, forming in one pass.
3. The poles should be free of rust, and after processing, they should undergo overall hot-dip galvanizing treatment. The galvanized layer should be smooth and beautiful, with no wrinkles, sagging, zinc lumps, peeling, spots, or defects in the positive and negative sides. The galvanized layer thickness should be ≥85μm according to national standards to ensure no corrosion for 20 years.
4. High-quality outdoor powder coating should be selected to electrostatically spray the already galvanized pole body, with a spray thickness ≥0.5mm and uniform color.
5. There should be an inspection door at the lower end of the pole, with a size of 200*90mm, using internal hexagon door screws.

Equal diameter pole 3-4 meters:

1. L-shaped poles with a height of 3 meters and 4 meters, with pick arm lengths of 1-3 meters. The main pole is made of equal diameter rods with a diameter ≥120mm and a thickness ≥4mm. The average diameter of the pick rod is ≥60mm and the pipe wall thickness is ≥3mm. A 50cm reflective strip wraps around the pole.
2. The pole material is Q235, and the welding should be done using automatic butt welding with submerged arc. The weld should be even, continuous, beautiful, and have strong penetration, forming in one pass.
3. The poles should be free of rust, and after processing, they should undergo overall hot-dip galvanizing treatment. The galvanized layer should be smooth and beautiful, with no wrinkles, sagging, zinc lumps, peeling, spots, or defects in the positive and negative sides. The galvanized layer thickness should be ≥85μm according to national standards to ensure no corrosion for 20 years.
4. High-quality outdoor powder coating should be selected to electrostatically spray the already galvanized pole body, with a spray thickness ≥0.5mm and uniform color.

Octagonal pole 3-4 meters:

1. Straight pole height of 3-4 meters, with a pick length of 0.5-3 meters. Octagonal poles are used, with a bottom outer diameter ≥150mm and a top ≥100mm. The suspension pole has a diameter ≥76mm, and a 50cm reflective strip wraps around the pole.
2. The main pole thickness is ≥4mm, and the suspension pole thickness is ≥3mm. They are hot-dip galvanized, plastic-coated, and painted.
3. The pole material is Q235, and the welding should be done using automatic butt welding with submerged arc. The weld should be even, continuous, beautiful, and have strong penetration, forming in one pass.
4. The poles should be free of rust, and after processing, they should undergo overall hot-dip galvanizing treatment. The galvanized layer should be smooth and beautiful, with no wrinkles, sagging, zinc lumps, peeling, spots, or defects in the positive and negative sides. The galvanized layer thickness should be ≥85μm according to national standards to ensure no corrosion for 20 years.
5. High-quality outdoor powder coating should be selected to electrostatically spray the already galvanized pole body, with a spray thickness ≥0.5mm and uniform color.

Octagonal pole 5 meters:

1. Straight pole height of 5 meters, with a pick length of 0.5-3 meters. Octagonal poles are used, with a bottom outer diameter ≥180mm and a top ≥130mm. The suspension pole has a diameter ≥76mm, and a 50cm reflective strip wraps around the pole.
2. The main pole thickness is ≥4mm, and the suspension pole thickness is ≥3mm. They are hot-dip galvanized, plastic-coated, and painted.
3. The pole material is Q235, and the welding should be done using automatic butt welding with submerged arc. The weld should be even, continuous, beautiful, and have strong penetration, forming in one pass.
4. The poles should be free of rust, and after processing, they should undergo overall hot-dip galvanizing treatment. The galvanized layer should be smooth and beautiful, with no wrinkles, sagging, zinc lumps, peeling, spots, or defects in the positive and negative sides. The galvanized layer thickness should be ≥85μm according to national standards to ensure no corrosion for 20 years.
5. High-quality outdoor powder coating should be selected to electrostatically spray the already galvanized pole body, with a spray thickness ≥0.5mm and uniform color.

Equal diameter pole 5-6 meters:

1. L-shaped poles with a height of 6 meters and pick arm lengths of 1-5 meters. The main pole is made of equal diameter rods with a diameter ≥220mm and a thickness ≥6mm. The average diameter of the pick rod is ≥114mm, and the pipe wall thickness is ≥6mm. A 50cm reflective strip wraps around the pole.
2. The pole material is Q235, and the welding should be done using automatic butt welding with submerged arc. The weld should be even, continuous, beautiful, and have strong penetration, forming in one pass.
3. The poles should be free of rust, and after processing, they should undergo overall hot-dip galvanizing treatment. The galvanized layer should be smooth and beautiful, with no wrinkles, sagging, zinc lumps, peeling, spots, or defects in the positive and negative sides. The galvanized layer thickness should be ≥85μm according to national standards to ensure no corrosion for 20 years.
4. High-quality outdoor powder coating should be selected to electrostatically spray the already galvanized pole body, with a spray thickness ≥0.5mm and uniform color.

L6 Pick 1-5 Meters:

1. The straight pole is 6 meters high and can pick from 1 to 5 meters. It uses an octagonal pole with a bottom outer diameter of ≥260mm, a top diameter of ≥220mm, a suspended pole outer diameter of ≥150mm, and a top diameter of ≥100mm. A 50cm reflective tape should be wrapped around the pole body.
2. The main pole should have a wall thickness of ≥6mm. The suspended pole should have a wall thickness of ≥4mm. They should be hot-dip galvanized and coated with colored paint.
3. The pole parts should be made of Q235 material, and welding should be done using automatic submerged arc welding with even and continuous welds, ensuring strong penetration and one-time forming.
4. The pole parts should be free from rust, and after processing, they should undergo overall hot-dip galvanizing treatment. The galvanized surface should be smooth and aesthetically pleasing, without wrinkles, sagging, zinc tumors, peeling, spots, or defects on the inner and outer surfaces. The galvanizing should meet national standards, with a coating thickness of ≥85μm, guaranteeing 20 years of corrosion resistance.
5. High-quality outdoor plastic powder should be selected to perform electrostatic spray coating on the galvanized pole body, with a coating thickness of ≥0.5mm and a uniform color.

L6-6:

1. The straight pole is 6 meters high and can pick 6 meters. It uses an octagonal pole with a bottom outer diameter of ≥285mm, a top diameter of ≥220mm, a suspended pole outer diameter of ≥170mm, and a top diameter of ≥100mm. A 50cm reflective tape should be wrapped around the pole body.
2. The main pole should have a wall thickness of ≥6mm. The suspended pole should have a wall thickness of ≥6mm. They should be hot-dip galvanized and coated with colored paint.
3. The pole parts should be made of Q235 material, and welding should be done using automatic submerged arc welding with even and continuous welds, ensuring strong penetration and one-time forming.
4. The pole parts should be free from rust, and after processing, they should undergo overall hot-dip galvanizing treatment. The galvanized surface should be smooth and aesthetically pleasing, without wrinkles, sagging, zinc tumors, peeling, spots, or defects on the inner and outer surfaces. The galvanizing should meet national standards, with a coating thickness of ≥85μm, guaranteeing 20 years of corrosion resistance.
5. High-quality outdoor plastic powder should be selected to perform electrostatic spray coating on the galvanized pole body, with a coating thickness of ≥0.5mm and a uniform color.

L6 Pick 7-8 Meters:

1. The straight pole is 6 meters high and can pick from 7 to 8 meters. It uses an octagonal pole with a bottom outer diameter of ≥285mm, a top diameter of ≥220mm, a suspended pole outer diameter of ≥220mm, and a top diameter of ≥100mm. A 50cm reflective tape should be wrapped around the pole body.
2. The main pole should have a wall thickness of ≥8mm. The suspended pole should have a wall thickness of ≥6mm. They should be hot-dip galvanized and coated with colored paint.
3. The pole parts should be made of Q235 material, and welding should be done using automatic submerged arc welding with even and continuous welds, ensuring strong penetration and one-time forming.
4. The pole parts should be free from rust, and after processing, they should undergo overall hot-dip galvanizing treatment. The galvanized surface should be smooth and aesthetically pleasing, without wrinkles, sagging, zinc tumors, peeling, spots, or defects on the inner and outer surfaces. The galvanizing should meet national standards, with a coating thickness of ≥85μm, guaranteeing 20 years of corrosion resistance.
5. High-quality outdoor plastic powder should be selected to perform electrostatic spray coating on the galvanized pole body, with a coating thickness of ≥0.5mm and a uniform color.

L6 Pick 9-10 Meters:

1. The straight pole is 6 meters high and can pick from 9 to 10 meters. It uses an octagonal pole with a bottom outer diameter of ≥285mm, a top diameter of ≥220mm, a suspended pole outer diameter of ≥250mm, and a top diameter of ≥100mm. A 50cm reflective tape should be wrapped around the pole body.
2. The main pole should have a wall thickness of ≥8mm. The suspended pole should have a wall thickness of ≥6mm. They should be hot-dip galvanized and coated with colored paint.
3. The pole parts should be made of Q235 material, and welding should be done using automatic submerged arc welding with even and continuous welds, ensuring strong penetration and one-time forming.
4. The pole parts should be free from rust, and after processing, they should undergo overall hot-dip galvanizing treatment. The galvanized surface should be smooth and aesthetically pleasing, without wrinkles, sagging, zinc tumors, peeling, spots, or defects on the inner and outer surfaces. The galvanizing should meet national standards, with a coating thickness of ≥85μm, guaranteeing 20 years of corrosion resistance.
5. High-quality outdoor plastic powder should be selected to perform electrostatic spray coating on the galvanized pole body, with a coating thickness of ≥0.5mm and a uniform color.

L6.5 pick 7-8 meters:

1. The straight pole is 6.5 meters high and picks 7-8 meters, using an octagonal pole. The outer diameter of the straight pole should be ≥320mm, with the top end ≥260mm. The outer diameter of the hanging pole should be ≥220mm, with the top end ≥100mm. A 50 cm reflective strip should be wrapped around the pole body.
2. The main pole should have a wall thickness ≥8mm. The hanging pole should have a wall thickness ≥6mm and should be hot-dip galvanized and coated with colored paint.
3. The pole components should be made of Q235 material, and automatic butt welding with submerged arc welding should be used. The welds should be even, continuous, aesthetically pleasing, strong in penetration, and formed in one pass.
4. The pole components should be free of rust, and after processing, they should undergo overall hot-dip galvanizing treatment. The surface of the galvanized layer should be smooth and aesthetically pleasing, without wrinkles, drips, zinc tumors, peeling, spots, or defects on the inside and outside surfaces. The hot-dip galvanizing should comply with national standards, and the thickness of the galvanized layer should be ≥85μm to ensure 20 years of corrosion resistance.
5. High-quality outdoor powder coating should be selected for electrostatic spraying treatment on the galvanized pole body, with a coating thickness ≥0.5mm and uniform color.

L6.5 pick 9-10 meters:

1. The straight pole is 6.5 meters high and picks 10 meters, using an octagonal pole. The outer diameter of the straight pole should be ≥320mm, with the top end ≥260mm. The outer diameter of the hanging pole should be ≥250mm, with the top end ≥100mm. A 50 cm reflective strip should be wrapped around the pole body.
2. The main pole should have a wall thickness ≥8mm. The hanging pole should have a wall thickness ≥6mm and should be hot-dip galvanized and coated with colored paint.
3. The pole components should be made of Q235 material, and automatic butt welding with submerged arc welding should be used. The welds should be even, continuous, aesthetically pleasing, strong in penetration, and formed in one pass.
4. The pole components should be free of rust, and after processing, they should undergo overall hot-dip galvanizing treatment. The surface of the galvanized layer should be smooth and aesthetically pleasing, without wrinkles, drips, zinc tumors, peeling, spots, or defects on the inside and outside surfaces. The hot-dip galvanizing should comply with national standards, and the thickness of the galvanized layer should be ≥85μm to ensure 20 years of corrosion resistance.
5. High-quality outdoor powder coating should be selected for electrostatic spraying treatment on the galvanized pole body, with a coating thickness ≥0.5mm and uniform color.

L6.5 pick 11-12 meters:

1. The straight pole is 6 meters high and picks 11-12 meters, using an octagonal pole. The bottom outer diameter of the straight pole should be ≥340mm, with the top end ≥280mm. The outer diameter of the hanging pole should be ≥230mm, with the top end ≥110mm. A 50 cm reflective strip should be wrapped around the pole body.
2. The main pole should have a wall thickness ≥10mm. The hanging pole should have a wall thickness ≥6mm and should be hot-dip galvanized and coated with colored paint.
3. The pole components should be made of Q235 material, and automatic butt welding with submerged arc welding should be used. The welds should be even, continuous, aesthetically pleasing, strong in penetration, and formed in one pass.
4. The pole components should be free of rust, and after processing, they should undergo overall hot-dip galvanizing treatment. The surface of the galvanized layer should be smooth and aesthetically pleasing, without wrinkles, drips, zinc tumors, peeling, spots, or defects on the inside and outside surfaces. The hot-dip galvanizing should comply with national standards, and the thickness of the galvanized layer should be ≥85μm to ensure 20 years of corrosion resistance.
5. High-quality outdoor powder coating should be selected for electrostatic spraying treatment on the galvanized pole body, with a coating thickness ≥0.5mm and uniform color.

Equal diameter pole 4.5-0.6 meters:

1. The L-shaped vertical pole has a height of 4.5 meters and an arm length of 0.6 meters. The vertical pole should have an equal diameter with a diameter ≥160mm, and the main pole thickness should be ≥6mm. The average pipe diameter of the hanging pole should be ≥89mm, with a pipe wall thickness ≥3mm.
2. The pole components should be made of Q235 material, and automatic butt welding with submerged arc welding should be used. The welds should be even, continuous, aesthetically pleasing, strong in penetration, and formed in one pass.
3. The pole components should be free of rust, and after processing, they should undergo overall hot-dip galvanizing treatment. The surface of the galvanized layer should be smooth and aesthetically pleasing, without wrinkles, drips, zinc tumors, peeling, spots, or defects on the inside and outside surfaces. The hot-dip galvanizing should comply with national standards, and the thickness of the galvanized layer should be ≥85μm to ensure 20 years of corrosion resistance.
4. High-quality outdoor powder coating should be selected for electrostatic spraying treatment on the galvanized pole body, with a coating thickness ≥0.5mm and uniform color.

Why choose us?

• Our Control Rod products are of the highest quality.
• We are inspiring and enterprising, constantly surpassing, and contributing to the revitalization of the national industry and the realization of the great rejuvenation of the Chinese nation.
• You can rely on us to provide you with top-quality Control Rod products and unmatched service.
• Our Outdoor Liftable Polygonal Monitoring Rod is known by customers throughout the world as user-friendly products characterized by high performance and extreme durability.
• Our Control Rod products are designed to make your life easier and more efficient.
• We have established a perfect after-sales service system, which has won the market and the users.
• With our expertise and experience, you can trust us to provide you with the best Control Rod products and services.
• The development of the Internet has opened up a wide space and freedom for our company's business model innovation. Continuous innovation is the inherent essence of e-commerce mode.
• Our company is your one-stop-shop for all your Control Rod needs.
• Our company provides customers with professional solutions of Outdoor Liftable Polygonal Monitoring Rod. Our persistence and pursuit of design concepts and production technology make us a leader in the industry. We always adhere to the independent innovation strategy and have an R&D team with an international perspective, constantly grasp the cutting-edge trends of the industry, and improve our R&D and production capabilities.

Hot Tags: outdoor liftable polygonal monitoring rod, China outdoor liftable polygonal monitoring rod manufacturers, suppliers, factory, hospitality led light, lighting pole packaging, lighting pole inspection, lighting pole fittings, lighting pole current, led deck light