Polished Aluminum Control Rod

Cross arm pole (borrowed pole), clamp pole:
The cross arm pole (borrowed pole) and clamp pole have a diameter of ≥60mm, extend from 0.5 to 4 meters, and are made of seamless steel pipes with a wall thickness of ≥3mm. The surface is treated with hot-dip galvanizing and electrostatic spraying. Different types of poles and construction methods should be selected based on the actual situation.

Community upright pole:

1. L-shaped upright pole with a height of 3 meters/3.5 meters/4 meters and variable diameter. The main pole has a length of 1 meter and a diameter of 140mm, while the remaining part has a length and a diameter of 76mm. The length of the cross arm is 0.5 meters. The main pole has a thickness of ≥4mm, and the average diameter of the cross arm is ≥60mm with a wall thickness of ≥3mm.
2. Q235 material should be used for the pole, and automatic butt welding with submerged arc welding should be employed. The weld should be uniform, continuous, beautiful, and have strong penetration, forming in one pass.
3. The pole should be free of rust, and after processing, it should undergo overall hot-dip galvanizing treatment. The surface of the galvanized layer should be smooth and beautiful, without wrinkles, sagging, zinc tumors, peeling, spots, or defects in the front and back surfaces. According to national standards, the thickness of the galvanized layer should be ≥85μm to ensure 20 years of corrosion resistance.
4. High-quality outdoor plastic powder should be selected for electrostatic spraying treatment of the galvanized pole body, with a spray thickness of ≥0.5mm and a uniform color.
5. A maintenance door with a size of 200*90mm should be opened at the lower end of the pole, using internal hexagon door screws.

Equal diameter pole 3-4 meters:

1. L-shaped upright pole with a height of 3 meters/4 meters and a cross arm length of 1-3 meters. The upright pole is an equal diameter pole with a diameter of ≥120mm and a thickness of ≥4mm. The average diameter of the cross arm is ≥60mm with a wall thickness of ≥3mm. There is a 50cm reflective strip wrapped around the pole.
2. Q235 material should be used for the pole, and automatic butt welding with submerged arc welding should be employed. The weld should be uniform, continuous, beautiful, and have strong penetration, forming in one pass.
3. The pole should be free of rust, and after processing, it should undergo overall hot-dip galvanizing treatment. The surface of the galvanized layer should be smooth and beautiful, without wrinkles, sagging, zinc tumors, peeling, spots, or defects in the front and back surfaces. According to national standards, the thickness of the galvanized layer should be ≥85μm to ensure 20 years of corrosion resistance.
4. High-quality outdoor plastic powder should be selected for electrostatic spraying treatment of the galvanized pole body, with a spray thickness of ≥0.5mm and a uniform color.

Octagonal pole 3-4 meters:

1. The straight pole has a height of 3-4 meters, and the cross arm extends from 0.5 to 3 meters. It uses an octagonal pole with a bottom outer diameter of ≥150mm and a top outer diameter of ≥100mm. The suspension pole has a diameter of ≥76mm. There is a 50cm reflective strip wrapped around the pole.
2. The main pole has a wall thickness of ≥4mm, and the suspension pole has a wall thickness of ≥3mm. They are both hot-dip galvanized, coated with plastic, and painted.
3. Q235 material should be used for the pole, and automatic butt welding with submerged arc welding should be employed. The weld should be uniform, continuous, beautiful, and have strong penetration, forming in one pass.
4. The pole should be free of rust, and after processing, it should undergo overall hot-dip galvanizing treatment. The surface of the galvanized layer should be smooth and beautiful, without wrinkles, sagging, zinc tumors, peeling, spots, or defects in the front and back surfaces. According to national standards, the thickness of the galvanized layer should be ≥85μm to ensure 20 years of corrosion resistance.
5. High-quality outdoor plastic powder should be selected for electrostatic spraying treatment of the galvanized pole body, with a spray thickness of ≥0.5mm and a uniform color.

Octagonal pole 5 meters:

1. The straight pole has a height of 5 meters, and the cross arm extends from 0.5 to 3 meters. It uses an octagonal pole with a bottom outer diameter of ≥180mm and a top outer diameter of ≥130mm. The suspension pole has a diameter of ≥76mm. There is a 50cm reflective strip wrapped around the pole.
2. The main pole has a wall thickness of ≥4mm, and the suspension pole has a wall thickness of ≥3mm. They are both hot-dip galvanized, coated with plastic, and painted.
3. Q235 material should be used for the pole, and automatic butt welding with submerged arc welding should be employed. The weld should be uniform, continuous, beautiful, and have strong penetration, forming in one pass.
4. The pole should be free of rust, and after processing, it should undergo overall hot-dip galvanizing treatment. The surface of the galvanized layer should be smooth and beautiful, without wrinkles, sagging, zinc tumors, peeling, spots, or defects in the front and back surfaces. According to national standards, the thickness of the galvanized layer should be ≥85μm to ensure 20 years of corrosion resistance.
5. High-quality outdoor plastic powder should be selected for electrostatic spraying treatment of the galvanized pole body, with a spray thickness of ≥0.5mm and a uniform color.

Equal diameter pole 5-6 meters:

1. L-shaped upright pole with a height of 6 meters and a cross arm length of 1-5 meters. The upright pole is an equal diameter pole with a diameter of ≥220mm and a wall thickness of ≥6mm. The average diameter of the cross arm is ≥114mm, and the wall thickness is ≥6mm. There is a 50cm reflective strip wrapped around the pole.
2. Q235 material should be used for the pole, and automatic butt welding with submerged arc welding should be employed. The weld should be uniform, continuous, beautiful, and have strong penetration, forming in one pass.
3. The pole should be free of rust, and after processing, it should undergo overall hot-dip galvanizing treatment. The surface of the galvanized layer should be smooth and beautiful, without wrinkles, sagging, zinc tumors, peeling, spots, or defects in the front and back surfaces. According to national standards, the thickness of the galvanized layer should be ≥85μm to ensure 20 years of corrosion resistance.
4. High-quality outdoor plastic powder should be selected for electrostatic spraying treatment of the galvanized pole body, with a spray thickness of ≥0.5mm and a uniform color.

L6 pick 1-5 meters:

1. The straight pole is 6 meters high with a pick range of 1-5 meters. An octagonal pole should be used, with a bottom outer diameter of ≥260mm and a top diameter of ≥220mm. The cross arm should have an outer diameter of ≥150mm at the end and ≥100mm at the top. A 50cm reflective strip should be wrapped around the pole.
2. The main pole wall thickness should be ≥6mm. The cross arm wall thickness should be ≥4mm. The pole should be hot-dip galvanized and coated with colored paint.
3. The pole should be made of Q235 material, and automatic butt joint submerged arc welding should be used for welding to ensure uniform, continuous, aesthetically pleasing welds with strong penetration and one-time forming.
4. The pole should be free from rust, and after processing, it should undergo overall hot-dip galvanizing treatment. The surface of the galvanized layer should be smooth and aesthetically pleasing, without wrinkles, drooping, zinc tumors, peeling, spots, or defects on the front and back surfaces. The galvanizing should meet national standards, with a galvanized layer thickness of ≥85μm, ensuring no rust for 20 years.
5. High-quality outdoor plastic powder should be selected for electrostatic spray coating on the already galvanized pole body. The spray coating thickness should be ≥0.5mm, with a uniform color.

L6 pick 6 meters:

1. The straight pole is 6 meters high with a pick of 6 meters. An octagonal pole should be used, with a bottom outer diameter of ≥285mm and a top diameter of ≥220mm. The cross arm should have an outer diameter of ≥170mm at the end and ≥100mm at the top. A 50cm reflective strip should be wrapped around the pole.
2. The main pole wall thickness should be ≥6mm. The cross arm wall thickness should be ≥6mm. The pole should be hot-dip galvanized and coated with colored paint.
3. The pole should be made of Q235 material, and automatic butt joint submerged arc welding should be used for welding to ensure uniform, continuous, aesthetically pleasing welds with strong penetration and one-time forming.
4. The pole should be free from rust, and after processing, it should undergo overall hot-dip galvanizing treatment. The surface of the galvanized layer should be smooth and aesthetically pleasing, without wrinkles, drooping, zinc tumors, peeling, spots, or defects on the front and back surfaces. The galvanizing should meet national standards, with a galvanized layer thickness of ≥85μm, ensuring no rust for 20 years.
5. High-quality outdoor plastic powder should be selected for electrostatic spray coating on the already galvanized pole body. The spray coating thickness should be ≥0.5mm, with a uniform color.

L6 pick 7-8 meters:

1. The straight pole is 6 meters high with a pick of 7-8 meters. An octagonal pole should be used, with a bottom outer diameter of ≥285mm and a top diameter of ≥220mm. The cross arm should have an outer diameter of ≥220mm at the end and ≥100mm at the top. A 50cm reflective strip should be wrapped around the pole.
2. The main pole wall thickness should be ≥8mm. The cross arm wall thickness should be ≥6mm. The pole should be hot-dip galvanized and coated with colored paint.
3. The pole should be made of Q235 material, and automatic butt joint submerged arc welding should be used for welding to ensure uniform, continuous, aesthetically pleasing welds with strong penetration and one-time forming.
4. The pole should be free from rust, and after processing, it should undergo overall hot-dip galvanizing treatment. The surface of the galvanized layer should be smooth and aesthetically pleasing, without wrinkles, drooping, zinc tumors, peeling, spots, or defects on the front and back surfaces. The galvanizing should meet national standards, with a galvanized layer thickness of ≥85μm, ensuring no rust for 20 years.
5. High-quality outdoor plastic powder should be selected for electrostatic spray coating on the already galvanized pole body. The spray coating thickness should be ≥0.5mm, with a uniform color.

L6 pick 9-10 meters:

1. The straight pole is 6 meters high with a pick of 9-10 meters. An octagonal pole should be used, with a bottom outer diameter of ≥285mm and a top diameter of ≥220mm. The cross arm should have an outer diameter of ≥250mm at the end and ≥100mm at the top. A 50cm reflective strip should be wrapped around the pole.
2. The main pole wall thickness should be ≥8mm. The cross arm wall thickness should be ≥6mm. The pole should be hot-dip galvanized and coated with colored paint.
3. The pole should be made of Q235 material, and automatic butt joint submerged arc welding should be used for welding to ensure uniform, continuous, aesthetically pleasing welds with strong penetration and one-time forming.
4. The pole should be free from rust, and after processing, it should undergo overall hot-dip galvanizing treatment. The surface of the galvanized layer should be smooth and aesthetically pleasing, without wrinkles, drooping, zinc tumors, peeling, spots, or defects on the front and back surfaces. The galvanizing should meet national standards, with a galvanized layer thickness of ≥85μm, ensuring no rust for 20 years.
5. High-quality outdoor plastic powder should be selected for electrostatic spray coating on the already galvanized pole body. The spray coating thickness should be ≥0.5mm, with a uniform color.

L6.5 pick 7-8 meters:

1. The straight pole is 6.5 meters high with a pick of 7-8 meters. An octagonal pole should be used, with an outer diameter of ≥320mm at the straight pole and ≥260mm at the top. The cross arm should have an outer diameter of ≥220mm at the end and ≥100mm at the top. A 50cm reflective strip should be wrapped around the pole.
2. The main pole wall thickness should be ≥8mm. The cross arm wall thickness should be ≥6mm. The pole should be hot-dip galvanized and coated with colored paint.
3. The pole should be made of Q235 material, and automatic butt joint submerged arc welding should be used for welding to ensure uniform, continuous, aesthetically pleasing welds with strong penetration and one-time forming.
4. The pole should be free from rust, and after processing, it should undergo overall hot-dip galvanizing treatment. The surface of the galvanized layer should be smooth and aesthetically pleasing, without wrinkles, drooping, zinc tumors, peeling, spots, or defects on the front and back surfaces. The galvanizing should meet national standards, with a galvanized layer thickness of ≥85μm, ensuring no rust for 20 years.
5. High-quality outdoor plastic powder should be selected for electrostatic spray coating on the already galvanized pole body. The spray coating thickness should be ≥0.5mm, with a uniform color.

L6.5 picking 9-10 meters:

1. The straight pole is 6.5 meters high and extends 10 meters, using an octagonal pole. The outer diameter of the straight pole should be ≥320mm, with the top ≥260mm. The outer diameter of the cantilever should be ≥250mm, with the top ≥100mm. A 50cm reflective strip should be wrapped around the pole body.
2. The main pole should have a wall thickness ≥8mm. The cantilever should have a wall thickness ≥6mm. Both should be hot-dip galvanized and coated with colored paint.
3. The pole components should be made of Q235 material. Welding should be done using automatic seam-submerged arc welding, with even, continuous, and aesthetically pleasing welds that have strong penetration and are formed in one pass.
4. The pole components should be free of rust, and after processing, undergo overall hot-dip galvanization treatment. The surface of the galvanized layer should be smooth and aesthetically pleasing, without wrinkles, drips, zinc tumors, peeling, spots, or defects on the positive and negative sides. Hot-dip galvanization should comply with national standards, with a galvanized layer thickness of ≥85μm, ensuring no rust for 20 years.
5. High-quality outdoor plastic powder should be selected and electrostatically sprayed onto the galvanized pole body. The thickness of the spray coating should be ≥0.5mm, with a uniform color.

L6.5 picking 11-12 meters:

1. The straight pole is 6 meters high and extends 11 to 12 meters, using an octagonal pole. The bottom outer diameter of the straight pole should be ≥340mm, with the top ≥280mm. The outer diameter of the cantilever should be ≥230mm, with the top ≥110mm. A 50cm reflective strip should be wrapped around the pole body.
2. The main pole should have a wall thickness ≥10mm. The cantilever should have a wall thickness ≥6mm. Both should be hot-dip galvanized and coated with colored paint.
3. The pole components should be made of Q235 material. Welding should be done using automatic seam-submerged arc welding, with even, continuous, and aesthetically pleasing welds that have strong penetration and are formed in one pass.
4. The pole components should be free of rust, and after processing, undergo overall hot-dip galvanization treatment. The surface of the galvanized layer should be smooth and aesthetically pleasing, without wrinkles, drips, zinc tumors, peeling, spots, or defects on the positive and negative sides. Hot-dip galvanization should comply with national standards, with a galvanized layer thickness of ≥85μm, ensuring no rust for 20 years.
5. High-quality outdoor plastic powder should be selected and electrostatically sprayed onto the galvanized pole body. The thickness of the spray coating should be ≥0.5mm, with a uniform color.

Equal diameter pole 4.5-0.6 meters:

1. The L-shaped upright pole has a height of 4.5 meters and a cantilever length of 0.6 meters. The upright pole should have a uniform diameter ≥160mm, with a main pole thickness ≥6mm. The average pipe diameter of the cantilever should be ≥89mm, with a pipe wall thickness ≥3mm.
2. The pole components should be made of Q235 material. Welding should be done using automatic seam-submerged arc welding, with even, continuous, and aesthetically pleasing welds that have strong penetration and are formed in one pass.
3. The pole components should be free of rust, and after processing, undergo overall hot-dip galvanization treatment. The surface of the galvanized layer should be smooth and aesthetically pleasing, without wrinkles, drips, zinc tumors, peeling, spots, or defects on the positive and negative sides. Hot-dip galvanization should comply with national standards, with a galvanized layer thickness of ≥85μm, ensuring no rust for 20 years.
4. High-quality outdoor plastic powder should be selected and electrostatically sprayed onto the galvanized pole body. The thickness of the spray coating should be ≥0.5mm, with a uniform color.

Why choose us?

• We offer competitive prices and exceptional service on all our Control Rod products.
• We have a vision to pursue excellence, provide high-quality Polished Aluminum Control Rod and services to our customers, and become an enterprise that our employees are proud of and the society praises.
• As a supplier and manufacturer, we take pride in offering high-quality products.
• The company adheres to the core values of "people-oriented, harmonious and win-win", insists on the business philosophy of "quality for survival, integrity for development", and strives for progress in the fierce market competition, enters the market with integrity, occupies the market with integrity, and wins the market with integrity.
• Our team of experts is dedicated to providing you with exceptional service.
• Polished Aluminum Control Rod insisted on arming the mind with Xi Jinping 's thoughts on socialism with Chinese characteristics in the new era, and carried out the education on the theme of "not forgetting the original intention and keeping in mind the mission".
• Our Control Rod products are designed with reliability and durability in mind.
• The group has a long history and significant advantages in undertaking the construction of special major national projects.
• Our team of experts is committed to providing you with the best service possible.
• We know that we only thrive if we will guarantee our combined cost competiveness and high-quality advantageous at the same time for Polished Aluminum Control Rod.

Introduction:

Manufactured from premium quality materials, our Polished Aluminum Control Rod is a reliable and durable solution for a wide range of applications. Whether you are in the automotive, aviation, or machinery industry, this control rod can help you to achieve the level of efficiency and performance that you require. In this product introduction, we will explore the key features and benefits of our polished aluminum control rod, and highlight the reasons why merchants around the world should consider it a valuable addition to their product catalog.

Key Features:

One of the key features of our polished aluminum control rod is its durability. Made from premium materials and subjected to rigorous quality control checks, this product is designed to withstand years of wear and tear. Furthermore, its corrosion-resistant properties make it ideal for use in harsh environments where other materials might quickly deteriorate.

Another key feature of our control rod is its lightweight construction. Aluminum is known for its lightweight properties, making it a popular choice for manufacturers who want to create products that are both durable and easy to handle. Our polished aluminum control rod is no exception to this, and its lightweight construction makes it easy to install and operate.

Benefits:

There are numerous benefits to using our polished aluminum control rod in your applications. One of the most notable is its high level of precision and accuracy. Thanks to its smooth surface finish and precise machining, this control rod allows for greater control and precision in your operations, resulting in improved efficiency and performance.

Another benefit of using our polished aluminum control rod is its resistance to thermal expansion. Unlike other materials that can expand or contract when exposed to heat or cold, aluminum maintains its shape and performance even in extreme temperatures. This ensures that your operations remain consistent and reliable, even under the most challenging conditions.

In addition to these benefits, our polished aluminum control rod is easy to clean and maintain. Its smooth surface finish means that it can be easily wiped down with a cloth to remove any dirt or debris that may have accumulated. This ease of maintenance helps to ensure that your control rod continues to perform at its best for years to come.

Why Choose Us:

When it comes to finding a reliable and high-performance control rod for your applications, there are several reasons why you should choose our polished aluminum control rod. Firstly, we use only the highest quality materials in our manufacturing process. This ensures that every control rod we produce meets the highest standards for durability, precision, and performance.

Secondly, we have a team of highly skilled and experienced engineers who are dedicated to developing and refining our products to ensure that they meet the evolving needs of our customers. This commitment to innovation and improvement helps to ensure that our products remain at the forefront of their respective industries, and continue to deliver exceptional performance and reliability.

Finally, we have a proven track record of delivering high-quality products to customers around the world. We pride ourselves on our ability to work closely with our customers to understand their unique needs and requirements, and to develop solutions that are tailored to their specific applications. This customer-focused approach has helped us to build a reputation as a reliable and trusted supplier of polished aluminum control rods and other high-performance products.

Conclusion:

In conclusion, our polished aluminum control rod is a reliable and durable solution for a wide range of applications. With its high level of precision, accuracy, and efficiency, it can help to improve the performance of your operations and make your work easier and more productive. Whether you are in the automotive, aviation, or machinery industry, we are confident that our product will meet your needs and exceed your expectations. So why wait? Contact us today to learn more about our polished aluminum control rod and how it can benefit your business.

Hot Tags: polished aluminum control rod, China polished aluminum control rod manufacturers, suppliers, factory, out of stock control rod, warranty for control rod, response time of control rod, special offer for control rod, regulatory compliance for control rod, refund policy for control rod