Zinc Plated Aluminum Control Rod

Crossarm (borrowing arm), hoop pick arm: with a diameter ≥60mm, extending 0.5-4 meters, seamless steel pipe with a wall thickness ≥3mm, surface treated with hot-dip galvanization and electrostatic spraying. Different types of arms and construction methods should be selected according to actual conditions.

Community Standing Pole:

1. L-shaped standing pole with a height of 3 meters/3.5 meters/4 meters and variable diameter. The main pole has a length of 1 meter and a diameter of 140mm, while the remaining part has a length and diameter of 76mm. The length of the extended arm is 0.5 meters, and the thickness of the main pole is ≥4mm. The average diameter of the pick arm is ≥60mm, and the wall thickness is ≥3mm.
2. The pole components should be made of Q235 material, and welding should be done using automatic submerged arc welding for even, continuous, aesthetically pleasing welds with good penetration.
3. The pole components should be free from rust and undergo overall hot-dip galvanization treatment after processing. The galvanized surface should be smooth and aesthetically pleasing without wrinkles, dripping, zinc tumors, peeling, spots, or defects on both sides. The galvanized layer thickness should be ≥85μm in accordance with national standards to ensure corrosion resistance for 20 years.
4. High-quality outdoor powder coating should be applied to the galvanized pole body through electrostatic spraying with a minimum thickness of ≥0.5mm, ensuring uniform color.
5. The bottom end of the pole should have a maintenance door with dimensions of 200*90mm, secured with internal hexagon screws.

Equal diameter pole 3-4 meters:

1. L-shaped standing pole with a height of 3 meters or 4 meters, and an extended arm length of 1-3 meters. The standing pole should have an equal diameter with a diameter ≥120mm, and a thickness of the main pole ≥4mm. The average diameter of the pick arm should be ≥60mm, and the wall thickness should be ≥3mm. A 50cm reflective strip should be wrapped around the pole.
2. The pole components should be made of Q235 material, and welding should be done using automatic submerged arc welding for even, continuous, aesthetically pleasing welds with good penetration.
3. The pole components should be free from rust and undergo overall hot-dip galvanization treatment after processing. The galvanized surface should be smooth and aesthetically pleasing without wrinkles, dripping, zinc tumors, peeling, spots, or defects on both sides. The galvanized layer thickness should be ≥85μm in accordance with national standards to ensure corrosion resistance for 20 years.
4. High-quality outdoor powder coating should be applied to the galvanized pole body through electrostatic spraying with a minimum thickness of ≥0.5mm, ensuring uniform color.

Eight-angle pole 3-4 meters:

1. Straight pole with a height of 3-4 meters and an extended length of 0.5-3 meters, made of eight-sided pole. The bottom outer diameter of the straight pole should be ≥150mm, and the top should be ≥100mm. The diameter of the hanging pole should be ≥76mm, and a 50cm reflective strip should be wrapped around the pole.
2. The main pole should have a wall thickness ≥4mm, and the hanging pole should have a wall thickness ≥3mm. Both should undergo hot-dip galvanization with plastic coating and painted.
3. The pole components should be made of Q235 material, and welding should be done using automatic submerged arc welding for even, continuous, aesthetically pleasing welds with good penetration.
4. The pole components should be free from rust and undergo overall hot-dip galvanization treatment after processing. The galvanized surface should be smooth and aesthetically pleasing without wrinkles, dripping, zinc tumors, peeling, spots, or defects on both sides. The galvanized layer thickness should be ≥85μm in accordance with national standards to ensure corrosion resistance for 20 years.
5. High-quality outdoor powder coating should be applied to the galvanized pole body through electrostatic spraying with a minimum thickness of ≥0.5mm, ensuring uniform color.

Translation: Octagonal Pole 5 meters:

1. The main pole is 5 meters high, with an extension of 0.5-3 meters. It adopts an octagonal pole design with a minimum outer diameter of 180mm at the bottom and a minimum outer diameter of 130mm at the top. The diameter of the extension arm should be at least 76mm. A 50cm reflective strip should be wrapped around the pole body.
2. The main pole should have a minimum wall thickness of 4mm. The extension arm should have a minimum wall thickness of 3mm. Both should be hot-dip galvanized and coated with colored paint.
3. The pole components should be made of Q235 material. Welding should be done using automatic seam submerged arc welding, with uniform and continuous welds that are aesthetically pleasing and strong in penetration. One-time forming is required.
4. The pole components should be free from rust. After processing, they should undergo overall hot-dip galvanizing treatment. The surface of the galvanized layer should be smooth and aesthetically pleasing, without wrinkles, sagging, zinc tumors, peeling, spots, or defects on the inside and outside surfaces. The hot-dip galvanizing should meet national standards, with a minimum zinc coating thickness of 85μm to ensure 20 years of corrosion resistance.
5. High-quality outdoor plastic powder should be selected for electrostatic spraying treatment of the galvanized pole body, with a minimum coating thickness of 0.5mm and uniform color.

Equal Diameter Pole 5-6 meters:

1. The L-shaped vertical pole should be 6 meters high, with an extension arm length of 1-5 meters. The vertical pole should have a minimum diameter of 220mm and a minimum wall thickness of 6mm. The average diameter of the extension arm should be at least 114mm, with a minimum wall thickness of 6mm. A 50cm reflective strip should be wrapped around the pole body.
2. The pole components should be made of Q235 material. Welding should be done using automatic seam submerged arc welding, with uniform and continuous welds that are aesthetically pleasing and strong in penetration. One-time forming is required.
3. The pole components should be free from rust. After processing, they should undergo overall hot-dip galvanizing treatment. The surface of the galvanized layer should be smooth and aesthetically pleasing, without wrinkles, sagging, zinc tumors, peeling, spots, or defects on the inside and outside surfaces. The hot-dip galvanizing should meet national standards, with a minimum zinc coating thickness of 85μm to ensure 20 years of corrosion resistance.
4. High-quality outdoor plastic powder should be selected for electrostatic spraying treatment of the galvanized pole body, with a minimum coating thickness of 0.5mm and uniform color.

L6 Extension Arm 1-5 meters:

1. The main pole is 6 meters high with a 1-5 meter extension arm. It adopts an octagonal pole design with a minimum bottom outer diameter of 260mm and a minimum top outer diameter of 220mm. The extension arm should have a minimum outer diameter of 150mm at the bottom and a minimum outer diameter of 100mm at the top. A 50cm reflective strip should be wrapped around the pole body.
2. The main pole should have a minimum wall thickness of 6mm. The extension arm should have a minimum wall thickness of 4mm. Both should be hot-dip galvanized and coated with colored paint.
3. The pole components should be made of Q235 material. Welding should be done using automatic seam submerged arc welding, with uniform and continuous welds that are aesthetically pleasing and strong in penetration. One-time forming is required.
4. The pole components should be free from rust. After processing, they should undergo overall hot-dip galvanizing treatment. The surface of the galvanized layer should be smooth and aesthetically pleasing, without wrinkles, sagging, zinc tumors, peeling, spots, or defects on the inside and outside surfaces. The hot-dip galvanizing should meet national standards, with a minimum zinc coating thickness of 85μm to ensure 20 years of corrosion resistance.
5. High-quality outdoor plastic powder should be selected for electrostatic spraying treatment of the galvanized pole body, with a minimum coating thickness of 0.5mm and uniform color.

L6-6:

1. The main pole is 6 meters high with a 6 meter extension arm. It adopts an octagonal pole design with a minimum bottom outer diameter of 285mm and a minimum top outer diameter of 220mm. The extension arm should have a minimum outer diameter of 170mm at the bottom and a minimum outer diameter of 100mm at the top. A 50cm reflective strip should be wrapped around the pole body.
2. The main pole should have a minimum wall thickness of 6mm. The extension arm should have a minimum wall thickness of 6mm. Both should be hot-dip galvanized and coated with colored paint.
3. The pole components should be made of Q235 material. Welding should be done using automatic seam submerged arc welding, with uniform and continuous welds that are aesthetically pleasing and strong in penetration. One-time forming is required.
4. The pole components should be free from rust. After processing, they should undergo overall hot-dip galvanizing treatment. The surface of the galvanized layer should be smooth and aesthetically pleasing, without wrinkles, sagging, zinc tumors, peeling, spots, or defects on the inside and outside surfaces. The hot-dip galvanizing should meet national standards, with a minimum zinc coating thickness of 85μm to ensure 20 years of corrosion resistance.
5. High-quality outdoor plastic powder should be selected for electrostatic spraying treatment of the galvanized pole body, with a minimum coating thickness of 0.5mm and uniform color.

L6 Extension Arm 7-8 meters:

1. The main pole is 6 meters high with an extension arm length of 7-8 meters. It adopts an octagonal pole design with a minimum bottom outer diameter of 285mm and a minimum top outer diameter of 220mm. The extension arm should have a minimum outer diameter of 220mm at the bottom and a minimum outer diameter of 100mm at the top. A 50cm reflective strip should be wrapped around the pole body.
2. The main pole should have a minimum wall thickness of 8mm. The extension arm should have a minimum wall thickness of 6mm. Both should be hot-dip galvanized and coated with colored paint.
3. The pole components should be made of Q235 material. Welding should be done using automatic seam submerged arc welding, with uniform and continuous welds that are aesthetically pleasing and strong in penetration. One-time forming is required.
4. The pole components should be free from rust. After processing, they should undergo overall hot-dip galvanizing treatment. The surface of the galvanized layer should be smooth and aesthetically pleasing, without wrinkles, sagging, zinc tumors, peeling, spots, or defects on the inside and outside surfaces. The hot-dip galvanizing should meet national standards, with a minimum zinc coating thickness of 85μm to ensure 20 years of corrosion resistance.
5. High-quality outdoor plastic powder should be selected for electrostatic spraying treatment of the galvanized pole body, with a minimum coating thickness of 0.5mm and uniform color.

L6 pole 9-10 meters:

1. The straight pole is 6 meters high and extends 9-10 meters. It is made of octagonal poles with a bottom outer diameter ≥285mm and a top diameter ≥220mm. The horizontal arm has an outer diameter ≥250mm and a top diameter ≥100mm. There is a 50cm reflective strip wrapped around the pole.
2. The main pole should have a wall thickness ≥8mm. The horizontal arm should have a wall thickness ≥6mm. Both should be hot-dip galvanized and coated with paint.
3. The pole parts should be made of Q235 material. Welding should be done using automatic submerged arc welding, ensuring uniform and aesthetically pleasing weld seams with strong penetration and one-time forming.
4. The pole parts should be free of rust and undergo overall hot-dip galvanization. The surface of the galvanized layer should be smooth and without wrinkles, drips, zinc tumors, peeling, spots, or defects on the front and back sides. The galvanization should meet national standards, with a minimum thickness of the galvanized layer ≥85μm to ensure 20 years of corrosion resistance.
5. High-quality outdoor powder coating should be used for the already galvanized pole body, with a thickness of the coating ≥0.5mm and a uniform color.

L6.5 pole 7-8 meters:

1. The straight pole is 6.5 meters high and extends 7-8 meters. It is made of octagonal poles with a bottom outer diameter ≥320mm and a top diameter ≥260mm. The horizontal arm has an outer diameter ≥220mm and a top diameter ≥100mm. There is a 50cm reflective strip wrapped around the pole.
2. The main pole should have a wall thickness ≥8mm. The horizontal arm should have a wall thickness ≥6mm. Both should be hot-dip galvanized and coated with paint.
3. The pole parts should be made of Q235 material. Welding should be done using automatic submerged arc welding, ensuring uniform and aesthetically pleasing weld seams with strong penetration and one-time forming.
4. The pole parts should be free of rust and undergo overall hot-dip galvanization. The surface of the galvanized layer should be smooth and without wrinkles, drips, zinc tumors, peeling, spots, or defects on the front and back sides. The galvanization should meet national standards, with a minimum thickness of the galvanized layer ≥85μm to ensure 20 years of corrosion resistance.
5. High-quality outdoor powder coating should be used for the already galvanized pole body, with a thickness of the coating ≥0.5mm and a uniform color.

L6.5 pole 9-10 meters:

1. The straight pole is 6.5 meters high and extends 10 meters. It is made of octagonal poles with a bottom outer diameter ≥320mm and a top diameter ≥260mm. The horizontal arm has an outer diameter ≥250mm and a top diameter ≥100mm. There is a 50cm reflective strip wrapped around the pole.
2. The main pole should have a wall thickness ≥8mm. The horizontal arm should have a wall thickness ≥6mm. Both should be hot-dip galvanized and coated with paint.
3. The pole parts should be made of Q235 material. Welding should be done using automatic submerged arc welding, ensuring uniform and aesthetically pleasing weld seams with strong penetration and one-time forming.
4. The pole parts should be free of rust and undergo overall hot-dip galvanization. The surface of the galvanized layer should be smooth and without wrinkles, drips, zinc tumors, peeling, spots, or defects on the front and back sides. The galvanization should meet national standards, with a minimum thickness of the galvanized layer ≥85μm to ensure 20 years of corrosion resistance.
5. High-quality outdoor powder coating should be used for the already galvanized pole body, with a thickness of the coating ≥0.5mm and a uniform color.

L6.5 pole 11-12 meters:

1. The straight pole is 6 meters high and extends 11-12 meters. It is made of octagonal poles with a bottom outer diameter ≥340mm and a top diameter ≥280mm. The horizontal arm has an outer diameter ≥230mm and a top diameter ≥110mm. There is a 50cm reflective strip wrapped around the pole.
2. The main pole should have a wall thickness ≥10mm. The horizontal arm should have a wall thickness ≥6mm. Both should be hot-dip galvanized and coated with paint.
3. The pole parts should be made of Q235 material. Welding should be done using automatic submerged arc welding, ensuring uniform and aesthetically pleasing weld seams with strong penetration and one-time forming.
4. The pole parts should be free of rust and undergo overall hot-dip galvanization. The surface of the galvanized layer should be smooth and without wrinkles, drips, zinc tumors, peeling, spots, or defects on the front and back sides. The galvanization should meet national standards, with a minimum thickness of the galvanized layer ≥85μm to ensure 20 years of corrosion resistance.
5. High-quality outdoor powder coating should be used for the already galvanized pole body, with a thickness of the coating ≥0.5mm and a uniform color.

Equidiameter pole 4.5-0.6 meters:

1. The L-shaped vertical pole is 4.5 meters high with an arm length of 0.6 meters. The vertical pole should have a diameter ≥160mm, and the main pole should have a thickness ≥6mm. The average diameter of the arm should be ≥89mm, and the wall thickness should be ≥3mm.
2. The pole parts should be made of Q235 material. Welding should be done using automatic submerged arc welding, ensuring uniform and aesthetically pleasing weld seams with strong penetration and one-time forming.
3. The pole parts should be free of rust and undergo overall hot-dip galvanization. The surface of the galvanized layer should be smooth and without wrinkles, drips, zinc tumors, peeling, spots, or defects on the front and back sides. The galvanization should meet national standards, with a minimum thickness of the galvanized layer ≥85μm to ensure 20 years of corrosion resistance.
4. High-quality outdoor powder coating should be used for the already galvanized pole body, with a thickness of the coating ≥0.5mm and a uniform color.

Why choose us?

• We strive to exceed our customers' expectations with our excellent service.
• We recognize the achievements of our employees and provide corresponding rewards, creating a good working environment and development prospects for them.
• We are constantly looking for ways to improve our products and services.
• We have the unique advantages that we have cultivated so far, and rely on these advantages to create our quality Zinc Plated Aluminum Control Rod.
• We offer a range of Control Rod products to suit every need and budget.
• Through horizontal and vertical communication methods, we enhance employees' identification with the company, thus forming a strong internal cohesion in the company.
• You can depend on us to provide reliable and durable Control Rod products.
• The company's products have scientific design, exquisite structure, beautiful appearance, superior performance and easy maintenance.
• Our company is committed to delivering top-quality products to our customers.
• To this day, our products remain classic and continue to innovate in technology, because we believe that innovative products have always been the driving force for our company's upward development.

Hot Tags: zinc plated aluminum control rod, China zinc plated aluminum control rod manufacturers, suppliers, factory, communication for control rod, regional market for control rod, resource conservation for control rod, inspection control rod, logistics control rod, domestic market for control rod