Aluminum Conical Monitoring Rod

Crossarm pole (borrowed pole), hoop picking pole:
Crossarm pole (borrowed pole), hoop picking pole, diameter ≥60MM, picking out 0.5-4 meters, seamless steel pipe, wall thickness ≥3MM, surface hot-dip galvanized and electrostatic spray treatment. Choose different types of poles and construction methods according to actual conditions.

Community standing pole:

1. L-shaped standing pole with a height of 3 meters/3.5 meters/4 meters, the main pole length is 1 meter with a diameter of 140mm, the remaining part length has a diameter of 76mm, and the picking arm length is 0.5 meters. The main pole thickness is ≥4mm; the average pipe diameter of the picking pole is ≥60mm, and the pipe wall thickness is ≥3mm.
2. The pole parts should be made of Q235 material, and the welding should be done by automatic seam submerged arc welding, with uniform and continuous welding seams, beautiful appearance, strong penetration, and one-time forming.
3. The pole parts should be free from rust, and the whole pole should be hot-dip galvanized after processing. The surface of the galvanized layer should be smooth and beautiful, without wrinkles, droops, zinc tumors, peeling, spots, or defects on the front and back surfaces. The galvanized layer thickness should be ≥85μm according to national standards to ensure 20 years of corrosion resistance.
4. High-quality outdoor powder should be selected for electrostatic spray treatment of the galvanized pole body, with a spray thickness of ≥0.5mm and uniform color.
5. There should be a maintenance door at the lower end of the pole, with a specification of 200*90mm, and using internal hexagon door screws.

Equal diameter pole 3-4 meters:

1. L-shaped standing pole with a height of 3 meters/4 meters, picking arm length of 1-3 meters. The standing pole adopts equal diameter pole with a diameter ≥120mm, and the main pole thickness is ≥4mm; the average pipe diameter of the picking pole is ≥60mm, and the pipe wall thickness is ≥3mm. There is a 50cm reflective strip wrapped around the pole.
2. The pole parts should be made of Q235 material, and the welding should be done by automatic seam submerged arc welding, with uniform and continuous welding seams, beautiful appearance, strong penetration, and one-time forming.
3. The pole parts should be free from rust, and the whole pole should be hot-dip galvanized after processing. The surface of the galvanized layer should be smooth and beautiful, without wrinkles, droops, zinc tumors, peeling, spots, or defects on the front and back surfaces. The galvanized layer thickness should be ≥85μm according to national standards to ensure 20 years of corrosion resistance.
4. High-quality outdoor powder should be selected for electrostatic spray treatment of the galvanized pole body, with a spray thickness of ≥0.5mm and uniform color.

Octagonal pole 3-4 meters:

1. Straight pole with a height of 3-4 meters, picking length of 0.5-3 meters, using octagonal pole, the bottom outer diameter of the straight pole is ≥150mm, and the top is ≥100mm, the hanging pole diameter is ≥76mm, and there is a 50cm reflective strip wrapped around the pole.
2. The main pole thickness is ≥4mm; the hanging pole wall thickness is ≥3mm, and it is hot-dip galvanized and plastic-coated with colored paint.
3. The pole parts should be made of Q235 material, and the welding should be done by automatic seam submerged arc welding, with uniform and continuous welding seams, beautiful appearance, strong penetration, and one-time forming.
4. The pole parts should be free from rust, and the whole pole should be hot-dip galvanized after processing. The surface of the galvanized layer should be smooth and beautiful, without wrinkles, droops, zinc tumors, peeling, spots, or defects on the front and back surfaces. The galvanized layer thickness should be ≥85μm according to national standards to ensure 20 years of corrosion resistance.
5. High-quality outdoor powder should be selected for electrostatic spray treatment of the galvanized pole body, with a spray thickness of ≥0.5mm and uniform color.

Octagonal pole 5 meters:

1. Straight pole with a height of 5 meters, picking length of 0.5-3 meters, using octagonal pole, the bottom outer diameter of the straight pole is ≥180mm, and the top is ≥130mm, the hanging pole diameter is ≥76mm, and there is a 50cm reflective strip wrapped around the pole.
2. The main pole thickness is ≥4mm; the hanging pole wall thickness is ≥3mm, and it is hot-dip galvanized and plastic-coated with colored paint.
3. The pole parts should be made of Q235 material, and the welding should be done by automatic seam submerged arc welding, with uniform and continuous welding seams, beautiful appearance, strong penetration, and one-time forming.
4. The pole parts should be free from rust, and the whole pole should be hot-dip galvanized after processing. The surface of the galvanized layer should be smooth and beautiful, without wrinkles, droops, zinc tumors, peeling, spots, or defects on the front and back surfaces. The galvanized layer thickness should be ≥85μm according to national standards to ensure 20 years of corrosion resistance.
5. High-quality outdoor powder should be selected for electrostatic spray treatment of the galvanized pole body, with a spray thickness of ≥0.5mm and uniform color.

Equal diameter pole 5-6 meters:

1. L-shaped standing pole with a height of 6 meters, picking arm length of 1-5 meters. The standing pole adopts equal diameter pole with a diameter ≥220mm, wall thickness ≥6mm; the average pipe diameter of the picking pole is ≥114mm; the pipe wall thickness is ≥6mm, and there is a 50cm reflective strip wrapped around the pole.
2. The pole parts should be made of Q235 material, and the welding should be done by automatic seam submerged arc welding, with uniform and continuous welding seams, beautiful appearance, strong penetration, and one-time forming.
3. The pole parts should be free from rust, and the whole pole should be hot-dip galvanized after processing. The surface of the galvanized layer should be smooth and beautiful, without wrinkles, droops, zinc tumors, peeling, spots, or defects on the front and back surfaces. The galvanized layer thickness should be ≥85μm according to national standards to ensure 20 years of corrosion resistance.
4. High-quality outdoor powder should be selected for electrostatic spray treatment of the galvanized pole body, with a spray thickness of ≥0.5mm and uniform color.

L6 pick 1-5 meters:

1. The straight pole is 6 meters high and can pick 1-5 meters. It adopts an octagonal pole with a minimum outer diameter of 260mm at the bottom and a minimum outer diameter of 220mm at the top. The cross arm has a minimum outer diameter of 150mm at the bottom and a minimum outer diameter of 100mm at the top. There should be a 50cm reflective strip wrapped around the pole.
2. The main pole should have a minimum wall thickness of 6mm, and the cross arm should have a minimum wall thickness of 4mm. Both should be hot-dip galvanized and coated with colored paint.
3. The pole parts should be made of Q235 material, and the welding should be done using automatic submerged arc welding with even and continuous welds, beautiful appearance, strong penetration, and one-time forming.
4. The pole parts should be free of rust, and after processing, they should undergo overall hot-dip galvanizing treatment. The surface of the galvanized layer should be smooth and beautiful, without wrinkles, sagging, zinc tumors, peeling, spots, or defects in the front and back surfaces. The galvanizing should meet the national standard, and the thickness of the galvanized layer should be ≥85μm to ensure 20 years of corrosion resistance.
5. High-quality outdoor powder coating should be selected, and the already hot-dip galvanized pole body should be treated with electrostatic spraying with a minimum coating thickness of 0.5mm and a uniform color.

L6 pick 6 meters:

1. The straight pole is 6 meters high and can pick 6 meters. It adopts an octagonal pole with a minimum outer diameter of 285mm at the bottom and a minimum outer diameter of 220mm at the top. The cross arm has a minimum outer diameter of 170mm at the bottom and a minimum outer diameter of 100mm at the top. There should be a 50cm reflective strip wrapped around the pole.
2. The main pole should have a minimum wall thickness of 6mm, and the cross arm should have a minimum wall thickness of 6mm. Both should be hot-dip galvanized and coated with colored paint.
3. The pole parts should be made of Q235 material, and the welding should be done using automatic submerged arc welding with even and continuous welds, beautiful appearance, strong penetration, and one-time forming.
4. The pole parts should be free of rust, and after processing, they should undergo overall hot-dip galvanizing treatment. The surface of the galvanized layer should be smooth and beautiful, without wrinkles, sagging, zinc tumors, peeling, spots, or defects in the front and back surfaces. The galvanizing should meet the national standard, and the thickness of the galvanized layer should be ≥85μm to ensure 20 years of corrosion resistance.
5. High-quality outdoor powder coating should be selected, and the already hot-dip galvanized pole body should be treated with electrostatic spraying with a minimum coating thickness of 0.5mm and a uniform color.

L6 pick 7-8 meters:

1. The straight pole is 6 meters high and can pick 7-8 meters. It adopts an octagonal pole with a minimum outer diameter of 285mm at the bottom and a minimum outer diameter of 220mm at the top. The cross arm has a minimum outer diameter of 220mm at the bottom and a minimum outer diameter of 100mm at the top. There should be a 50cm reflective strip wrapped around the pole.
2. The main pole should have a minimum wall thickness of 8mm, and the cross arm should have a minimum wall thickness of 6mm. Both should be hot-dip galvanized and coated with colored paint.
3. The pole parts should be made of Q235 material, and the welding should be done using automatic submerged arc welding with even and continuous welds, beautiful appearance, strong penetration, and one-time forming.
4. The pole parts should be free of rust, and after processing, they should undergo overall hot-dip galvanizing treatment. The surface of the galvanized layer should be smooth and beautiful, without wrinkles, sagging, zinc tumors, peeling, spots, or defects in the front and back surfaces. The galvanizing should meet the national standard, and the thickness of the galvanized layer should be ≥85μm to ensure 20 years of corrosion resistance.
5. High-quality outdoor powder coating should be selected, and the already hot-dip galvanized pole body should be treated with electrostatic spraying with a minimum coating thickness of 0.5mm and a uniform color.

L6 pick 9-10 meters:

1. The straight pole is 6 meters high and can pick 9-10 meters. It adopts an octagonal pole with a minimum outer diameter of 285mm at the bottom and a minimum outer diameter of 220mm at the top. The cross arm has a minimum outer diameter of 250mm at the bottom and a minimum outer diameter of 100mm at the top. There should be a 50cm reflective strip wrapped around the pole.
2. The main pole should have a minimum wall thickness of 8mm, and the cross arm should have a minimum wall thickness of 6mm. Both should be hot-dip galvanized and coated with colored paint.
3. The pole parts should be made of Q235 material, and the welding should be done using automatic submerged arc welding with even and continuous welds, beautiful appearance, strong penetration, and one-time forming.
4. The pole parts should be free of rust, and after processing, they should undergo overall hot-dip galvanizing treatment. The surface of the galvanized layer should be smooth and beautiful, without wrinkles, sagging, zinc tumors, peeling, spots, or defects in the front and back surfaces. The galvanizing should meet the national standard, and the thickness of the galvanized layer should be ≥85μm to ensure 20 years of corrosion resistance.
5. High-quality outdoor powder coating should be selected, and the already hot-dip galvanized pole body should be treated with electrostatic spraying with a minimum coating thickness of 0.5mm and a uniform color.

L6.5 pick 7-8 meters:

1. The straight pole is 6.5 meters high and can pick 7-8 meters. It adopts an octagonal pole with a minimum outer diameter of 320mm at the bottom and a minimum outer diameter of 260mm at the top. The cross arm has a minimum outer diameter of 220mm at the bottom and a minimum outer diameter of 100mm at the top. There should be a 50cm reflective strip wrapped around the pole.
2. The main pole should have a minimum wall thickness of 8mm, and the cross arm should have a minimum wall thickness of 6mm. Both should be hot-dip galvanized and coated with colored paint.
3. The pole parts should be made of Q235 material, and the welding should be done using automatic submerged arc welding with even and continuous welds, beautiful appearance, strong penetration, and one-time forming.
4. The pole parts should be free of rust, and after processing, they should undergo overall hot-dip galvanizing treatment. The surface of the galvanized layer should be smooth and beautiful, without wrinkles, sagging, zinc tumors, peeling, spots, or defects in the front and back surfaces. The galvanizing should meet the national standard, and the thickness of the galvanized layer should be ≥85μm to ensure 20 years of corrosion resistance.
5. High-quality outdoor powder coating should be selected, and the already hot-dip galvanized pole body should be treated with electrostatic spraying with a minimum coating thickness of 0.5mm and a uniform color.

L6.5 picks 9-10 meters:

1. The straight pole is 6.5 meters high and picks 10 meters, using an octagonal pole. The outer diameter of the straight pole should be ≥320mm, and the top should be ≥260mm. The outer diameter of the cantilever pole should be ≥250mm, and the top should be ≥100mm. A 50cm reflective strip should be wrapped around the pole.
2. The main pole should have a wall thickness ≥8mm. The cantilever pole should have a wall thickness ≥6mm. They should be hot-dip galvanized and coated with paint.
3. The pole components should be made of Q235 material. The welding should be done using automatic submerged arc welding with even and continuous welds, aesthetically pleasing appearance, strong penetration, and one-time forming.
4. The pole components should be free from rust and undergo overall hot-dip galvanizing treatment after processing. The surface of the galvanized layer should be smooth and beautiful, without wrinkles, sagging, zinc tumors, peeling, spots, or defects on the front and back sides. The galvanizing should meet national standards, and the thickness of the galvanized layer should be ≥85μm to ensure no corrosion for 20 years.
5. High-quality outdoor plastic powder should be selected for electrostatic spray treatment on the galvanized pole, with a spray thickness ≥0.5mm and uniform color.

L6.5 picks 11-12 meters:

1. The straight pole is 6 meters high and picks 11-12 meters, using an octagonal pole. The bottom outer diameter of the straight pole should be ≥340mm, and the top should be ≥280mm. The outer diameter of the cantilever pole should be ≥230mm, and the top should be ≥110mm. A 50cm reflective strip should be wrapped around the pole.
2. The main pole should have a wall thickness ≥10mm. The cantilever pole should have a wall thickness ≥6mm. They should be hot-dip galvanized and coated with paint.
3. The pole components should be made of Q235 material. The welding should be done using automatic submerged arc welding with even and continuous welds, aesthetically pleasing appearance, strong penetration, and one-time forming.
4. The pole components should be free from rust and undergo overall hot-dip galvanizing treatment after processing. The surface of the galvanized layer should be smooth and beautiful, without wrinkles, sagging, zinc tumors, peeling, spots, or defects on the front and back sides. The galvanizing should meet national standards, and the thickness of the galvanized layer should be ≥85μm to ensure no corrosion for 20 years.
5. High-quality outdoor plastic powder should be selected for electrostatic spray treatment on the galvanized pole, with a spray thickness ≥0.5mm and uniform color.

Equal-diameter pole 4.5-0.6 meters:

1. The L-shaped upright pole has a height of 4.5 meters, and the cantilever arm length is 0.6 meters. The diameter of the upright pole should be ≥160mm, and the main pole should have a thickness ≥6mm. The average pipe diameter of the cantilever pole should be ≥89mm, and the pipe wall thickness should be ≥3mm.
2. The pole components should be made of Q235 material. The welding should be done using automatic submerged arc welding with even and continuous welds, aesthetically pleasing appearance, strong penetration, and one-time forming.
3. The pole components should be free from rust and undergo overall hot-dip galvanizing treatment after processing. The surface of the galvanized layer should be smooth and beautiful, without wrinkles, sagging, zinc tumors, peeling, spots, or defects on the front and back sides. The galvanizing should meet national standards, and the thickness of the galvanized layer should be ≥85μm to ensure no corrosion for 20 years.
4. High-quality outdoor plastic powder should be selected for electrostatic spray treatment on the galvanized pole, with a spray thickness ≥0.5mm and uniform color.

Why choose us?

• We are dedicated to providing you with the highest-quality Control Rod products at an affordable price.
• With a wide range, good quality, reasonable prices and stylish designs, our items are extensively used in this field and other industries.
• Our team of experts is passionate about what they do and dedicated to providing you with exceptional products and services.
• We continue to deepen the structural reform on the supply side, accelerate the pace of transformation and upgrading, and strive to improve the quality of development.
• We take great pride in delivering exceptional quality products and services to our customers.
• We take "honesty, pragmatism, innovation and enterprise" as our unwavering belief.
• We are a trustworthy partner for all your Control Rod needs.
• While engaging in business activities with the resources given to us by society, companies are bound to develop together with society, and therefore we believe that our activities must also be transparent, fair and just.
• We strive to exceed our customers' expectations with our excellent service.
• Our company adheres to the business philosophy of 'responsibility wins respect, innovation wins competition', abides by the principle of honesty and mutual benefit, and contributes to the industry of Aluminum Conical Monitoring Rod.

Introduction:

The Aluminum Conical Monitoring Rod is a premium quality, high-performance product that has been designed to provide accurate and reliable monitoring of various environmental parameters. This rod is ideal for professional use in a wide range of applications. It is manufactured in China using the latest technology and high-grade materials, making it a durable and long-lasting product.

Features and Benefits:

The Aluminum Conical Monitoring Rod is designed with precision and accuracy in mind. It comes in a conical shape that allows for easy insertion into the ground for monitoring purposes. The rod is made of high-quality aluminum material, which makes it lightweight, durable, and corrosion-resistant. The rod's surface is coated with a non-reflective finish to prevent glare during use.

One of the primary benefits of the Aluminum Conical Monitoring Rod is its versatility. The rod can be used for measuring a wide range of environmental parameters such as soil moisture, temperature, pH levels, and so on. Moreover, the rod is highly sensitive, providing accurate results every time. It is equipped with a built-in sensor that can detect even the slightest changes in the environment. As a result, this product is perfect for use in scientific research, agriculture, environmental monitoring, and other related fields.

The Aluminum Conical Monitoring Rod is also easy to use and transport. It comes with a carrying case that makes it easy to store and transport. The rod's conical shape makes it easy to insert into the ground, while the handle provides a secure grip. The rod is lightweight and compact, allowing for easy handling and maneuverability. Moreover, the product is highly durable, making it a great long-term investment for merchants who need reliable environmental monitoring equipment.

Conclusion:

The Aluminum Conical Monitoring Rod is a high-quality product that is designed to provide accurate and reliable monitoring of various environmental parameters. It is manufactured in China and made of high-grade materials, making it durable and long-lasting. The rod's versatility makes it ideal for use in different applications such as agriculture, scientific research, and environmental monitoring. The product is also easy to use and transport, making it a great investment for merchants who need reliable environmental monitoring equipment. With its precision design and outstanding features, the Aluminum Conical Monitoring Rod is undoubtedly a reliable and valuable addition to any merchant's product offering.

Hot Tags: aluminum conical monitoring rod, China aluminum conical monitoring rod manufacturers, suppliers, factory, repair control rod, design optimization for control rod, engineering user for control rod, quality assurance control rod, reliability in operation for control rod, customized order control rod