Telescopic Painted Polygonal Monitoring Rod

Arm lever (borrowed lever) and hoop picking lever:
The arm lever (borrowed lever) and hoop picking lever have a diameter of ≥60mm and extend 0.5-4 meters. They are made of seamless steel pipes with a wall thickness of ≥3mm. The surface is hot-dip galvanized and electrostatically sprayed. Different types of levers and construction methods should be selected according to the actual situation.

Residential area standing pole:

1. L-shaped standing pole with a height of 3 meters/3.5 meters/4 meters and varying diameters. The main pole has a length of 1 meter and a diameter of 140mm, while the remaining part has a length and diameter of 76mm. The arm lever has a length of 0.5 meters, and the main pole has a thickness of ≥4mm. The average pipe diameter of the lever is ≥60mm, and the pipe wall thickness is ≥3mm.
2. The pole components are made of Q235 material, and the welding should be done using automatic butt welding with submerged arc welding. The welds should be uniform, continuous, beautiful, strong in penetration, and formed in one pass.
3. The pole components should be free from rust, and after processing, they should undergo overall hot-dip galvanizing treatment. The surface of the galvanized layer should be smooth and beautiful, without wrinkles, drooping, zinc tumors, peeling, spots, or defects in the Yin-Yang surface. The hot-dip galvanizing should meet national standards, and the thickness of the galvanized layer should be ≥85μm, ensuring 20 years of corrosion resistance.
4. High-quality outdoor powder should be selected for electrostatic spraying treatment of the galvanized pole body, with a spraying thickness of ≥0.5mm and a uniform color.
5. The lower end of the pole body should have an inspection door with a size of 200*90mm, using internal hexagonal door screws.

Equal-diameter pole 3-4 meters:

1. L-shaped standing pole with a height of 3 meters or 4 meters and an arm lever length of 1-3 meters. The standing pole uses an equal-diameter pole with a diameter of ≥120mm and a main pole thickness of ≥4mm. The average pipe diameter of the lever is ≥60mm, and the pipe wall thickness is ≥3mm. A 50cm reflective strip wraps around the pole body.
2. The pole components are made of Q235 material, and the welding should be done using automatic butt welding with submerged arc welding. The welds should be uniform, continuous, beautiful, strong in penetration, and formed in one pass.
3. The pole components should be free from rust, and after processing, they should undergo overall hot-dip galvanizing treatment. The surface of the galvanized layer should be smooth and beautiful, without wrinkles, drooping, zinc tumors, peeling, spots, or defects in the Yin-Yang surface. The hot-dip galvanizing should meet national standards, and the thickness of the galvanized layer should be ≥85μm, ensuring 20 years of corrosion resistance.
4. High-quality outdoor powder should be selected for electrostatic spraying treatment of the galvanized pole body, with a spraying thickness of ≥0.5mm and a uniform color.

Octagonal pole 3-4 meters:

1. Straight pole with a height of 3-4 meters and an arm length of 0.5-3 meters. It uses an octagonal pole with a bottom outer diameter of ≥150mm and a top outer diameter of ≥100mm. The hanging pole has a diameter of ≥76mm, and a 50cm reflective strip wraps around the pole body.
2. The main pole has a wall thickness of ≥4mm, and the hanging pole has a wall thickness of ≥3mm. They are thermally galvanized and coated with paint.
3. The pole components are made of Q235 material, and the welding should be done using automatic butt welding with submerged arc welding. The welds should be uniform, continuous, beautiful, strong in penetration, and formed in one pass.
4. The pole components should be free from rust, and after processing, they should undergo overall hot-dip galvanizing treatment. The surface of the galvanized layer should be smooth and beautiful, without wrinkles, drooping, zinc tumors, peeling, spots, or defects in the Yin-Yang surface. The hot-dip galvanizing should meet national standards, and the thickness of the galvanized layer should be ≥85μm, ensuring 20 years of corrosion resistance.
5. High-quality outdoor powder should be selected for electrostatic spraying treatment of the galvanized pole body, with a spraying thickness of ≥0.5mm and a uniform color.

Octagonal pole 5 meters:

1. Straight pole with a height of 5 meters and an arm length of 0.5-3 meters. It uses an octagonal pole with a bottom outer diameter of ≥180mm and a top outer diameter of ≥130mm. The hanging pole has a diameter of ≥76mm, and a 50cm reflective strip wraps around the pole body.
2. The main pole has a wall thickness of ≥4mm, and the hanging pole has a wall thickness of ≥3mm. They are thermally galvanized and coated with paint.
3. The pole components are made of Q235 material, and the welding should be done using automatic butt welding with submerged arc welding. The welds should be uniform, continuous, beautiful, strong in penetration, and formed in one pass.
4. The pole components should be free from rust, and after processing, they should undergo overall hot-dip galvanizing treatment. The surface of the galvanized layer should be smooth and beautiful, without wrinkles, drooping, zinc tumors, peeling, spots, or defects in the Yin-Yang surface. The hot-dip galvanizing should meet national standards, and the thickness of the galvanized layer should be ≥85μm, ensuring 20 years of corrosion resistance.
5. High-quality outdoor powder should be selected for electrostatic spraying treatment of the galvanized pole body, with a spraying thickness of ≥0.5mm and a uniform color.

Equal-diameter pole 5-6 meters:

1. L-shaped standing pole with a height of 6 meters and an arm length of 1-5 meters. The standing pole uses an equal-diameter pole with a diameter of ≥220mm and a wall thickness of ≥6mm. The average pipe diameter of the lever is ≥114mm, and the pipe wall thickness is ≥6mm. A 50cm reflective strip wraps around the pole body.
2. The pole components are made of Q235 material, and the welding should be done using automatic butt welding with submerged arc welding. The welds should be uniform, continuous, beautiful, strong in penetration, and formed in one pass.
3. The pole components should be free from rust, and after processing, they should undergo overall hot-dip galvanizing treatment. The surface of the galvanized layer should be smooth and beautiful, without wrinkles, drooping, zinc tumors, peeling, spots, or defects in the Yin-Yang surface. The hot-dip galvanizing should meet national standards, and the thickness of the galvanized layer should be ≥85μm, ensuring 20 years of corrosion resistance.
4. High-quality outdoor powder should be selected for electrostatic spraying treatment of the galvanized pole body, with a spraying thickness of ≥0.5mm and a uniform color.

L6 pole 1-5 meters:

1. The straight pole is 6 meters high and extends 1-5 meters, using an octagonal pole. The bottom outer diameter of the straight pole should be ≥260mm, and the top should be ≥220mm. The crossarm outer diameter should be ≥150mm, and the top should be ≥100mm. A 50 cm reflective strip should be wrapped around the pole.
2. The main pole wall thickness should be ≥6mm; the crossarm wall thickness should be ≥4mm. They should be hot-dip galvanized and coated with colored paint.
3. The pole components should be made of Q235 material, and automatic seam submerged arc welding should be used for welding. The welds should be even, continuous, aesthetically pleasing, strong in penetration, and formed in one pass.
4. The pole components should be free of rust, and after processing, they should undergo overall hot-dip galvanizing treatment. The galvanized surface should be smooth and aesthetically pleasing, without wrinkles, sagging, zinc tumors, peeling, spots, or defects on the inside and outside surfaces. The galvanized layer thickness should be ≥85μm according to national standards to ensure 20 years of corrosion resistance.
5. High-quality outdoor plastic powder should be selected to perform electrostatic spraying treatment on the already galvanized pole body. The spraying thickness should be ≥0.5mm, and the color should be uniform.

L6-6 pole:

1. The straight pole is 6 meters high and extends 6 meters, using an octagonal pole. The bottom outer diameter of the straight pole should be ≥285mm, and the top should be ≥220mm. The crossarm outer diameter should be ≥170mm, and the top should be ≥100mm. A 50 cm reflective strip should be wrapped around the pole.
2. The main pole wall thickness should be ≥6mm; the crossarm wall thickness should be ≥6mm. They should be hot-dip galvanized and coated with colored paint.
3. The pole components should be made of Q235 material, and automatic seam submerged arc welding should be used for welding. The welds should be even, continuous, aesthetically pleasing, strong in penetration, and formed in one pass.
4. The pole components should be free of rust, and after processing, they should undergo overall hot-dip galvanizing treatment. The galvanized surface should be smooth and aesthetically pleasing, without wrinkles, sagging, zinc tumors, peeling, spots, or defects on the inside and outside surfaces. The galvanized layer thickness should be ≥85μm according to national standards to ensure 20 years of corrosion resistance.
5. High-quality outdoor plastic powder should be selected to perform electrostatic spraying treatment on the already galvanized pole body. The spraying thickness should be ≥0.5mm, and the color should be uniform.

L6 pole 7-8 meters:

1. The straight pole is 6 meters high and extends 7-8 meters, using an octagonal pole. The bottom outer diameter of the straight pole should be ≥285mm, and the top should be ≥220mm. The crossarm outer diameter should be ≥220mm, and the top should be ≥100mm. A 50 cm reflective strip should be wrapped around the pole.
2. The main pole wall thickness should be ≥8mm; the crossarm wall thickness should be ≥6mm. They should be hot-dip galvanized and coated with colored paint.
3. The pole components should be made of Q235 material, and automatic seam submerged arc welding should be used for welding. The welds should be even, continuous, aesthetically pleasing, strong in penetration, and formed in one pass.
4. The pole components should be free of rust, and after processing, they should undergo overall hot-dip galvanizing treatment. The galvanized surface should be smooth and aesthetically pleasing, without wrinkles, sagging, zinc tumors, peeling, spots, or defects on the inside and outside surfaces. The galvanized layer thickness should be ≥85μm according to national standards to ensure 20 years of corrosion resistance.
5. High-quality outdoor plastic powder should be selected to perform electrostatic spraying treatment on the already galvanized pole body. The spraying thickness should be ≥0.5mm, and the color should be uniform.

L6 pole 9-10 meters:

1. The straight pole is 6 meters high and extends 9-10 meters, using an octagonal pole. The bottom outer diameter of the straight pole should be ≥285mm, and the top should be ≥220mm. The crossarm outer diameter should be ≥250mm, and the top should be ≥100mm. A 50 cm reflective strip should be wrapped around the pole.
2. The main pole wall thickness should be ≥8mm; the crossarm wall thickness should be ≥6mm. They should be hot-dip galvanized and coated with colored paint.
3. The pole components should be made of Q235 material, and automatic seam submerged arc welding should be used for welding. The welds should be even, continuous, aesthetically pleasing, strong in penetration, and formed in one pass.
4. The pole components should be free of rust, and after processing, they should undergo overall hot-dip galvanizing treatment. The galvanized surface should be smooth and aesthetically pleasing, without wrinkles, sagging, zinc tumors, peeling, spots, or defects on the inside and outside surfaces. The galvanized layer thickness should be ≥85μm according to national standards to ensure 20 years of corrosion resistance.
5. High-quality outdoor plastic powder should be selected to perform electrostatic spraying treatment on the already galvanized pole body. The spraying thickness should be ≥0.5mm, and the color should be uniform.

L6.5 pole 7-8 meters:

1. The straight pole is 6.5 meters high and extends 7-8 meters, using an octagonal pole. The outer diameter of the straight pole should be ≥320mm at the bottom and ≥260mm at the top. The crossarm outer diameter should be ≥220mm, and the top should be ≥100mm. A 50 cm reflective strip should be wrapped around the pole.
2. The main pole wall thickness should be ≥8mm; the crossarm wall thickness should be ≥6mm. They should be hot-dip galvanized and coated with colored paint.
3. The pole components should be made of Q235 material, and automatic seam submerged arc welding should be used for welding. The welds should be even, continuous, aesthetically pleasing, strong in penetration, and formed in one pass.
4. The pole components should be free of rust, and after processing, they should undergo overall hot-dip galvanizing treatment. The galvanized surface should be smooth and aesthetically pleasing, without wrinkles, sagging, zinc tumors, peeling, spots, or defects on the inside and outside surfaces. The galvanized layer thickness should be ≥85μm according to national standards to ensure 20 years of corrosion resistance.
5. High-quality outdoor plastic powder should be selected to perform electrostatic spraying treatment on the already galvanized pole body. The spraying thickness should be ≥0.5mm, and the color should be uniform.

L6.5 pick 9-10 meters:

1. The straight pole is 6.5 meters high and picks 10 meters. It is made of octagonal bar with an outer diameter of ≥320mm at the top and ≥260mm at the top. The cross arm has an outer diameter of ≥250mm at the top and ≥100mm at the top. A 50cm reflective strip wraps around the pole.
2. The main pole should have a wall thickness of ≥8mm, and the cross arm should have a wall thickness of ≥6mm. They should be hot-dip galvanized and coated with colored paint.
3. The pole parts should be made of Q235 material, and automatic submerged arc welding should be used for welding to ensure even and continuous welds that are aesthetically pleasing and have strong penetration.
4. The pole parts should be free from rust, and they should undergo overall hot-dip galvanizing treatment after processing. The surface of the galvanized layer should be smooth and free from wrinkles, drips, zinc tumors, peeling, spots, and defects on the positive and negative sides. The galvanizing should meet national standards, and the thickness of the galvanized layer should be ≥85μm to ensure 20 years of corrosion resistance.
5. High-quality outdoor plastic powder should be selected for electrostatic spraying treatment of the already galvanized pole body, with a spraying thickness of ≥0.5mm and a uniform color.

L6.5 pick 11-12 meters:

1. The straight pole is 6 meters high and picks 11 to 12 meters. It is made of octagonal bar with a bottom outer diameter of ≥340mm and a top outer diameter of ≥280mm. The cross arm has an outer diameter of ≥230mm at the top and ≥110mm at the top. A 50cm reflective strip wraps around the pole.
2. The main pole should have a wall thickness of ≥10mm, and the cross arm should have a wall thickness of ≥6mm. They should be hot-dip galvanized and coated with colored paint.
3. The pole parts should be made of Q235 material, and automatic submerged arc welding should be used for welding to ensure even and continuous welds that are aesthetically pleasing and have strong penetration.
4. The pole parts should be free from rust, and they should undergo overall hot-dip galvanizing treatment after processing. The surface of the galvanized layer should be smooth and free from wrinkles, drips, zinc tumors, peeling, spots, and defects on the positive and negative sides. The galvanizing should meet national standards, and the thickness of the galvanized layer should be ≥85μm to ensure 20 years of corrosion resistance.
5. High-quality outdoor plastic powder should be selected for electrostatic spraying treatment of the already galvanized pole body, with a spraying thickness of ≥0.5mm and a uniform color.

Equal diameter pole 4.5-0.6 meters:

1. The L-shaped upright pole has a height of 4.5 meters and a cantilever length of 0.6 meters. The upright pole is made of equal diameter pole with a diameter of ≥160mm, and the main pole has a thickness of ≥6mm. The average pipe diameter of the cantilever pole is ≥89mm, and the pipe wall thickness is ≥3mm.
2. The pole parts should be made of Q235 material, and automatic submerged arc welding should be used for welding to ensure even and continuous welds that are aesthetically pleasing and have strong penetration.
3. The pole parts should be free from rust, and they should undergo overall hot-dip galvanizing treatment after processing. The surface of the galvanized layer should be smooth and free from wrinkles, drips, zinc tumors, peeling, spots, and defects on the positive and negative sides. The galvanizing should meet national standards, and the thickness of the galvanized layer should be ≥85μm to ensure 20 years of corrosion resistance.
4. High-quality outdoor plastic powder should be selected for electrostatic spraying treatment of the already galvanized pole body, with a spraying thickness of ≥0.5mm and a uniform color.

Why choose us?

• Our company is dedicated to providing you with the best value for your money.
• We widely carry out cooperative development and collaborative innovation to solve the problems of discontinuous industrial chain and unsustainable innovation platform.
• We offer a range of Control Rod products to suit every need and budget.
• Our company starts in many aspects such as welfare system development, staff appointment, training and personal development of employees, and strives to build a perfect development platform for employees to ensure that they can share the fruits of their own development.
• We are constantly looking for ways to improve our products and services.
• With the cultural philosophy of "creating a world-class brand" and "creating a brand with heart", the company has won widespread praise in the industry and received wide recognition from customers with its superb technology and sincere service.
• At our company, we pride ourselves on being your trusted partner for all your Control Rod needs.
• All employees of our company will focus on the interests of customers and continue to innovate in production technology and management. We strive to create customer-satisfied products with a pragmatic and efficient work style, and wholeheartedly provide customers with timely and thoughtful supporting services.
• We are your partner for all your Control Rod needs.
• We are aimed to try our utmost to provide our customers with excellent Telescopic Painted Polygonal Monitoring Rod and satisfied services more than they desire.

Hot Tags: telescopic painted polygonal monitoring rod, China telescopic painted polygonal monitoring rod manufacturers, suppliers, factory, lighting pole caps, lighting pole shipping, lighting pole importer, led downlight, led work light, led canopy light