Highway Lighting Pole without Light Source

1. The lamp pole is made of Q235 steel with a wall thickness of δ ≥ 4mm. The supplier of the steel is well-known manufacturers such as Baosteel and Ma Steel.
2. The lamp pole and lamp bracket are hot-dip galvanized both inside and outside, with a galvanized layer thickness of not less than 85μm. The anti-corrosion lifespan is over 30 years. The surface is treated with DuPont metal paint or spray coating, with a thickness of not less than 100μm. Modifications should be made in no more than 2 locations and should not exceed 5% of the pole surface area.
3. The steel pole should have good welding. Conical poles with a length of 8 meters or below should have no transverse welds, and the longitudinal welds should be symmetrical without incomplete welding. When horizontally placed without load, the straightness error of the pole should be less than 3‰.
4. For flange-type lamp poles, the allowable length deviation is ±0.5% of the pole length, the allowable cross-sectional dimension deviation is ±0.5%, the deviation in size of the wiring handhole is allowed to be ±5mm, and for once-formed cantilever lamp poles, the allowable deviation in inclination angle is ±1°. After the lamp arm (bracket) is connected and fixed to the lamp pole, the deviation between the center verticality and the pole verticality should not exceed 3°.
5. The inspection door frame of the lamp pole should have reinforcement measures to ensure its mechanical strength is not lower than that of a pole without the door frame.
6. The upper end of the inspection door of the lamp pole is equipped with a theft-proof triangle made of φ10mm stainless steel screws, and the lower end is hinged. PE protective wire terminal connectors are welded on the inner wall of the inspection door of the lamp pole.
7. The fastening screws and nuts of the lamp pole and lamp bracket are made of stainless steel.
8. The cable junction box is installed inside the bottom lamp holder crossbar and equipped with an RT-14 fuse. A 6A fuse is used for 250W, a 4A fuse is used for 150W, and a 10A fuse is used for 400W. The junction box is made of PTFE material.
9. Reinforcement ribs should be welded at the connection between the lamp pole and flange, with a thickness not less than 8mm, and there should be at least 4 reinforcement ribs.
10. The overhead line of the lamp pole should use aviation waxed line with a rated voltage not lower than 500V. The minimum allowable cross-sectional area of the conductor for power below 400W should be 1.5mm², and for power between 400W and 1000W, it should be 2.5mm².
11. The overall wind resistance capability of the lamp pole should be over 30m/s, and the seismic resistance level should be above level 8.
12. The lamp drawing is for reference only. Specific dimensions, colors, processes, etc. are subject to actual survey or owner’s requirements.

Why choose us?

• Our Lighting Poles are designed with safety and functionality in mind.
• Our company aims to become the preferred partner of customers, provide more efficient Highway Lighting Pole Without Light Source solutions, and use high technology, professional knowledge, flexibility, and fast service to achieve customers and develop ourselves.
• We have a team of highly skilled professionals committed to quality.
• Management is a kind of productivity, and the fundamental task of management is to rationally allocate resources and improve organizational efficiency.
• Our Lighting Poles are made with precision and attention to detail.
• Not forgetting our original intention and keeping our mission in mind, we actively fulfill our corporate social responsibility and pursue the balance between economic growth, environmental protection and social progress.
• We offer flexible production and delivery options.
• We cherish our inner dreams and pursuits, because with dreams we are more energetic, more creative, and more driven to surpass other organizations and individuals to achieve the sublimation of self-realm.
• Our factory complies with all necessary safety and quality standards.
• We treat every customer sincerely and strive for customer satisfaction by helping them succeed through technology, quality, service and continuous innovation.

Highway Lighting Pole Without Light Source - Illuminate Your Roads and Highways

As a conscientious manufacturer, we understand that highway lighting is a critical component in road safety. We have designed a range of Highway Lighting Poles Without Light Source that are perfect for use on highways, roads, bridges, and other application areas. Our products are designed to provide reliable and safe illumination, improving driver confidence and ensuring visibility during nighttime journeys.

Our Highway Lighting Poles Without Light Source are made from high-quality materials that are designed to withstand harsh weather conditions and extreme temperatures. The poles are weather-resistant, anti-corrosive, and can withstand high winds and other environmental factors, making them ideal for use across a range of geographies and climatic conditions.

Our Highway Lighting Poles Without Light Source are available in a range of sizes, styles, and finishes to meet the specific requirements of our clients. We employ advanced technologies and manufacturing processes to ensure that our products are of the highest quality and meet industry standards. All our products are tested and inspected rigorously to ensure flawlessness and continuous performance.

What sets our Highway Lighting Poles Without Light Source apart is our innovative design, which increases the efficiency and effectiveness of the lighting system. Our products are designed to minimize light pollution and enhance the brightness and range of illumination. By using our Highway Lighting Poles Without Light Source, you can expect to achieve low power consumption, high brightness, and minimum maintenance expenses.

Our Highway Lighting Poles Without Light Source are easy to install and maintain, making them perfect for use by streetlight contractors or highway maintenance crews. Our experienced technical team is always available to provide support and guidance throughout the installation process.

Our commitment to quality, sustainability, and reliability is at the heart of everything we do. Our Highway Lighting Poles Without Light Source deliver value, safety, and security to your highways and bridges, ensuring that they are safe and illuminated both day and night.

Whether you need Highway Lighting Poles Without Light Source for a small road or a large-scale construction project, we have the right product to suit your needs. Contact us today to receive a quote or request more information about our products. We are confident that you will find our Highway Lighting Poles Without Light Source to be a reliable, efficient, and cost-effective solution for all your highway lighting needs.

Hot Tags: highway lighting pole without light source, China highway lighting pole without light source manufacturers, suppliers, factory, lighting pole importer, lighting pole logistics, lighting pole beam angle, lighting pole spacers, lighting pole load bearing, lighting pole market